American National Standard for Measurement Microphones, Part 5: Methods for pressure calibration of working standard microphones by comparison
美国测量传声器国家标准第5部分:通过比较对工作标准传声器进行压力校准的方法

2021-09-28

American National Standard for Microphone Windscreens - Part 1: Test Procedures for Measurements of Insertion Loss in Still Air.
美国麦克风前挡风玻璃国家标准.第1部分:静止空气中插入损耗测量的试验程序

2014-04-29

American National Standard for Measurement Microphones, Part 2: Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique.
美国测量传声器国家标准第2部分:用互易技术对实验室标准传声器进行压力校准的主要方法

2021-06-21

Measurement microphones - Part 1: Specifications for laboratory standard microphones
测量麦克风 - 第1部分:实验室标准麦克风的规格

2000-07-21

Measurement microphones -- Part 1: Specifications for laboratory standard microphones.
测量传声器第1部分:实验室标准传声器规范

2002-05-30

American National Standard for Measurement Microphones, Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
美国测量传声器国家标准第3部分:用互易技术对实验室标准传声器进行自由场校准的主要方法

2021-07-28

전기음향 — 측정용 마이크로폰 — 제1부: 시험실용 표준마이크로폰의 규격
电声学 - 测量用麦克风 - 第1部分:测试室标准麦克风的标准

2017-08-29

전기음향 — 측정용 마이크로폰 — 제1부: 시험실용 표준마이크로폰의 규격
电声学.测量传声器.第1部分:实验室标准传声器规范

2017-08-29

电声学 测量传声器 第1部分：实验室标准传声器规范
Electroacoustics - Measurement microphones - Part 1: Specifications for laboratory standard microphones

2010-12-01

American National Standard for Measurement Microphones, Part 7: Values for the difference between free field and pressure sensitivity levels of laboratory standard microphones
美国测量传声器国家标准第7部分:实验室标准传声器的自由场和压力灵敏度之间的差值

2021-09-28

AMERICAN NATIONAL STANDARD Mechanical vibration - Measurement and evaluation of machine vibration - Part 1: General guidelines (a nationally adopted international standard)
美国国家标准机械振动.机器振动的测量和评估.第1部分:一般指南（国家采用的国际标准）

Measurement microphones - Part 1: Specifications for laboratory standard microphones (IEC 61094-1:2000); German version EN 61094-1:2000
测量传声器.第1部分:实验室标准传声器规范（IEC 61094-1-2000）；德文版EN 61094-1:2000

2001-08-01

American National Standard Qualities and Procedures for Description and Measurement of Environmental Sound - Part 1: Basic Quantities and Definitions
美国国家标准环境声音描述和测量的质量和程序第1部分:基本量和定义

2013-02-27

American National Standard Quantities and Procedures for Description and Measurement of Underwater Sound from Ships - Part 1: General Requirements
美国国家标准船舶水下声音描述和测量的数量和程序第1部分:一般要求

2009-09-30

American National Standard for Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 1: Airborne noise measurement (a nationally adopted international standard).
美国声学国家标准.小型空气移动装置产生的空气噪声和结构振动的测量.第1部分:空气噪声测量（国家采用的国际标准）

2013-04-02

American National Standard Electroacoustics - Simulators of Human Head and Ear - Part 1: Ear Simulator for the Measurement of Supra-aural and Circumaural Earphones
美国国家标准电声学.人头和耳朵模拟器.第1部分:测量耳上和耳周耳机用耳朵模拟器

2014-01-21

American National Standard for Electric Lamps - Incandescent Lamps - Safety Specifications, Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes
美国国家电灯标准白炽灯安全规范第1部分:家用和类似用途普通照明用钨丝灯

2018-04-17

American National Standard for Electroacoustics - Sound Level Meters - Part 1: Specifications (a nationally adopted international standard). (Revision of ANSI S1.4-1983 (R2006), ANSI S1.4a-1985 (R2006) and ANSI S1.43-1997 (R2007))
美国电声学国家标准.声级计.第1部分:规范（国家采用的国际标准） （ANSI S1.4-1983（R2006）的修订版 ANSI S1 4a-1985（R2006）和ANSI S1 43-1997（R2007））

2014-07-21

American National Standard for Electroacoustics - Sound Level Meters - Part 1: Specifications (a nationally adopted international standard). (Revision of ANSI S1.4-1983 (R2006), ANSI S1.4a-1985 (R2006) and ANSI S1.43-1997 (R2007))
美国电声学国家标准.声级计.第1部分:规范（国家采用的国际标准） （ANSI S1.4-1983（R2006）的修订版 ANSI S1 4a-1985（R2006）和ANSI S1 43-1997（R2007））

2014-07-21

AMERICAN NATIONAL STANDARD Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
美国国家标准机械振动.机器振动的测量和评估.第2部分:额定转速为1500 r/min 1800 r/min 3000 r/min和3600 r/min 液膜轴承超过40 MW的陆上燃气轮机 蒸汽轮机和发电机