American National Standard for Measurement Microphones, Part 1: Specifications for Laboratory Standard Microphones.
美国测量话筒国家标准第1部分:实验室标准话筒规范

2021-06-21

American National Standard for Measurement Microphones, Part 5: Methods for pressure calibration of working standard microphones by comparison
美国测量传声器国家标准第5部分:通过比较对工作标准传声器进行压力校准的方法

2021-09-28

American National Standard for Measurement Microphones, Part 2: Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique.
美国测量传声器国家标准第2部分:用互易技术对实验室标准传声器进行压力校准的主要方法

2021-06-21

American National Standard for Measurement Microphones, Part 7: Values for the difference between free field and pressure sensitivity levels of laboratory standard microphones
美国测量传声器国家标准第7部分:实验室标准传声器的自由场和压力灵敏度之间的差值

2021-09-28

American National Standard for Microphone Windscreens - Part 1: Test Procedures for Measurements of Insertion Loss in Still Air.
美国麦克风前挡风玻璃国家标准.第1部分:静止空气中插入损耗测量的试验程序

2014-04-29

American National Standard Quantities and Procedures for Description and Measurement of Environmental Sound - Part 3: Short-term Measurements with an Observer Present
美国国家标准环境声音描述和测量的数量和程序.第3部分:有观察员在场的短期测量

2013-01-15

AMERICAN NATIONAL STANDARD Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
美国国家标准机械振动.机器振动的测量和评估.第2部分:额定转速为1500 r/min 1800 r/min 3000 r/min和3600 r/min 液膜轴承超过40 MW的陆上燃气轮机 蒸汽轮机和发电机