American National Standard for Measurement Microphones, Part 1: Specifications for Laboratory Standard Microphones.
美国测量话筒国家标准第1部分:实验室标准话筒规范

2021-06-21

American National Standard for Measurement Microphones, Part 5: Methods for pressure calibration of working standard microphones by comparison
美国测量传声器国家标准第5部分:通过比较对工作标准传声器进行压力校准的方法

2021-09-28

American National Standard for Measurement Microphones, Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
美国测量传声器国家标准第3部分:用互易技术对实验室标准传声器进行自由场校准的主要方法

2021-07-28

American National Standard for Measurement Microphones, Part 7: Values for the difference between free field and pressure sensitivity levels of laboratory standard microphones
美国测量传声器国家标准第7部分:实验室标准传声器的自由场和压力灵敏度之间的差值

2021-09-28

American National Standard for Microphone Windscreens - Part 1: Test Procedures for Measurements of Insertion Loss in Still Air.
美国麦克风前挡风玻璃国家标准.第1部分:静止空气中插入损耗测量的试验程序

2014-04-29

American National Standard Quantities and Procedures for Description and Measurement of Outdoor Environmental Sound - Part 2: Measurement of Long-Term, Wide-Area Sound
美国国家标准室外环境声描述和测量的数量和程序第2部分:长期广域声的测量

1992-01-01

American National Standard for Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 2: Structure-borne vibration measurements (a nationally adopted international standard).
美国声学国家标准.小型空气移动装置产生的空气噪声和结构振动的测量.第2部分:结构振动测量（国家采用的国际标准）

2013-12-04

American National Standard for Acoustics - Measurement of Airborne Noise Emitted by Information Technology and Telecommunications Equipment - Part 2: Declaration of Noise Emission Levels.
美国声学国家标准.信息技术和电信设备发出的空气噪声的测量.第2部分:噪声发射水平的声明

2011-08-17

American National Standard Electroacoustics - Simulators of Human Head and Ear - Part 5: 2 cm*2 Coupler for the Measurement of Hearing Aids and Earphones Coupled to the Ear by Means of Ear Inserts (a modified nationally adopted international standard)
美国国家标准电声学.人头和耳朵模拟器.第5部分:通过耳塞连接到耳朵的助听器和耳机的测量用2 cm*2耦合器（修改后的国家采用的国际标准）

2014-07-21

AMERICAN NATIONAL STANDARD Mechanical vibration - Measurement and evaluation of machine vibration - Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
美国国家标准机械振动.机器振动的测量和评估.第2部分:额定转速为1500 r/min 1800 r/min 3000 r/min和3600 r/min 液膜轴承超过40 MW的陆上燃气轮机 蒸汽轮机和发电机