实现预期目的需要进行以下测试:在可重复和受控负载下进行实验室测试，以分析ROPS是否符合本SAE标准的性能要求。应进行静态试验（6.1）或动态试验（6.2）。进行挤压试验，以验证变形ROPS在翻转姿态下支撑拖拉机的有效性。在合理控制的条件下，在后部和侧面进行现场翻转试验，以验证保护系统在实际动态条件下的有效性。（省略本试验的要求见6.4.1.1）。除了实验室和现场加载要求外，还有温度材料要求。（见7.1.2。）

Fulfillment of the intended purpose requires testing as follows:A laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this SAE Standard. Either the static test (6.1) or the dynamic test (6.2) shall be conducted.A crush test to verify the effectiveness of the deformed ROPS in supporting the tractor in an upset attitude.A field upset test under reasonably controlled conditions, both to the rear and side, to verify the effectiveness of the protective system under actual dynamic conditions. (See 6.4.1.1 for requirements for the omission of this test).In addition to the laboratory and field loading requirements, there is a temperature-material requirement. (See 7.1.2.)