Standard Welding Procedure Specification for Shielded Metal Arc Welding of Galvanized Steel, 10 through 18 Gauge, in the As-Welded Condition, With of Without Backing
无背衬焊态10至18号镀锌钢的保护金属极电弧焊标准焊接工艺规范

1991-01-01

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Galvanized Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下10至18号镀锌钢（M-1）带或不带衬垫的保护金属极电弧焊标准焊接工艺规范（Swps）

2002-01-01

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel, (M-1, Group 1), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下 带或不带衬垫的10至18号规格碳钢（M-1 第1组）的保护金属极电弧焊的标准焊接工艺规范

1991-01-01

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Austenitic Stainless Steel, (M-8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下10至18号奥氏体不锈钢（M-8或P-8）带或不带衬垫的保护金属极电弧焊的标准焊接工艺规范

1991-01-01

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the as-Welded Condition, With Backing
3/16至3/4英寸碳钢（M-1/P-1 第1组或第2组）在焊接状态下带衬垫的保护金属极电弧焊的标准焊接工艺规范

1990-01-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
焊接状态下1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范

2001-10-31

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 3/4 INCH, IN THE AS WELDED CONDITIONS WITH BACKING
3/16至3/4英寸碳钢（M-1/P-1 第1组或第2组）在带衬垫的焊态条件下的保护金属极电弧焊标准焊接工艺规范（WPS）

1989-12-18

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Carbon Steel (M-1, P-1, or S-1 to M-1, P-1, or S-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下10至18 Gauge碳钢（M-1、P-1或S-1至M-1、P-1或S-1）带或不带衬垫的保护金属极电弧焊标准焊接工艺规范（Swps）

2002-01-01

Standard Welding Procedure Specification for Gas Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下10至18号规格碳钢（M-1 第1组）带或不带衬垫的气体保护金属极电弧焊的标准焊接工艺规范

1990-01-01

Draft Document - Quality assurance of welded structures - Specification and approval of welding procedures for metallic materials - Part 125: Welding procedure tests for the arc welding of aluminium castings and combinations of cast to wrought material (Proposal for a European standard)
文件草案.焊接结构的质量保证.金属材料焊接程序的规范和批准.第125部分:铝铸件和铸造与锻造材料组合的电弧焊焊接程序试验（欧洲标准提案）

1995-08-01

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8/P-8/S-8, Group 1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下 带或不带衬垫的10至18 Gauge碳钢至奥氏体不锈钢（M-1至M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（Swps）

Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch
碳钢（M-1/P-1/S-1）组1和2、1/8至1-1/2英寸的氩加25%二氧化碳气体保护金属极弧焊（短路过渡模式）和氩加2%氧气保护气体保护金属极弧焊（喷射过渡模式）的标准焊接工艺规范（Swps）

2006-01-01

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4" Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
1/8至3/4“厚E6010（垂直上坡）焊态碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准焊接工艺规范 主要用于管道应用

2019-03-01

Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（WPS） 厚 ER3XX-XX 焊接状态 主要用于管道应用

1997-03-20

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER80S-B2 and E801
1/8至1/2英寸铬钼钢（M-4/P-4 第1组或第2组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS） 厚度 焊接状态 焊接状态 1/8至1-1/2英寸 厚度 焊后热处理条件 ER80S-B2和E801

1999-01-01

Standard Welding Procedure Spec (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS） 厚 ER3XX ER3XX-XX 焊接状态 主要用于管道应用

2001-03-01

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, ER90S-B3 and E9018-B3, Primarily Pipe Applic
1/8至1/2英寸铬钼钢（M-5A/P-5A）的气体保护钨极电弧焊后的标准焊接工艺规范（SWPS） 厚 如焊接状态；1/8至1-1/2英寸 厚度 焊后热处理条件 ER90S-B3和E9018-B3 主要用于管道应用

1999-12-08

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, IN521, ER90S-B3, and E9
1/8至1/2英寸铬钼钢（M-5A/P-5A）的气体保护钨极电弧焊（自耗镶块根部）和金属保护电弧焊的标准焊接工艺规范（SWPS） 厚 如焊接状态；1/8至1-1/2英寸 厚度、焊后热处理条件、IN521、ER90S-B3和E9

1999-12-08

Standard Welding Procedure Specification (Swps) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Galvanized Steel (M-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号镀锌钢（M-1）气体保护金属极电弧焊（短路过渡模式）的标准焊接工艺规范（Swps） 带或不带衬垫

2002-01-01

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH
碳钢（M-1/P-1/S-1 第1组或第2组）与奥氏体不锈钢（M-8/P-8/S-8 第1组） 1/8至1-1/2英寸的气体保护金属极电弧焊后的钨极气体保护焊标准焊接工艺规范（SWPS）

2002-08-28