Standard Welding Procedure Specification for Shielded Metal Arc Welding of Galvanized Steel, 10 through 18 Gauge, in the As-Welded Condition, With of Without Backing
无背衬焊态10至18号镀锌钢的保护金属极电弧焊标准焊接工艺规范

1991-01-01

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Galvanized Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下10至18号镀锌钢（M-1）带或不带衬垫的保护金属极电弧焊标准焊接工艺规范（Swps）

2002-01-01

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel, (M-1, Group 1), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下 带或不带衬垫的10至18号规格碳钢（M-1 第1组）的保护金属极电弧焊的标准焊接工艺规范

1991-01-01

Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（WPS） 厚 ER3XX-XX 焊接状态 主要用于管道应用

1997-03-20

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Austenitic Stainless Steel, (M-8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下10至18号奥氏体不锈钢（M-8或P-8）带或不带衬垫的保护金属极电弧焊的标准焊接工艺规范

1991-01-01

Standard Welding Procedure Spec (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS） 厚 ER3XX ER3XX-XX 焊接状态 主要用于管道应用

2001-03-01

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER80S-B2 and E801
1/8至1/2英寸铬钼钢（M-4/P-4 第1组或第2组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS） 厚度 焊接状态 焊接状态 1/8至1-1/2英寸 厚度 焊后热处理条件 ER80S-B2和E801

1999-01-01

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the as-Welded Condition, With Backing
3/16至3/4英寸碳钢（M-1/P-1 第1组或第2组）在焊接状态下带衬垫的保护金属极电弧焊的标准焊接工艺规范

1990-01-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
焊接状态下1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范

2001-10-31

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8 or P-8)10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下 带或不带衬垫的碳钢与奥氏体不锈钢（M-1至M-8或P-8）10至18 Gauge的保护金属极电弧焊的标准焊接工艺规范

1991-01-01

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 7/8 INCH, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
3/16至7/8英寸碳钢（M-1/P-1 第1组或第2组）焊态钨极气体保护焊标准焊接工艺规范（WPS） 带或不带衬垫

1989-12-18

Standard WPS for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
1/8至1/2“厚的E7018焊态或焊后热处理条件下碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准WPS 主要用于管道应用

2019-03-01

Standard Welding Procedure Specification for Gas Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下10至18号规格碳钢（M-1 第1组）带或不带衬垫的气体保护金属极电弧焊的标准焊接工艺规范

1990-01-01

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Carbon Steel (M-1, P-1, or S-1 to M-1, P-1, or S-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下10至18 Gauge碳钢（M-1、P-1或S-1至M-1、P-1或S-1）带或不带衬垫的保护金属极电弧焊标准焊接工艺规范（Swps）

2002-01-01

Draft Document - Quality assurance of welded structures - Specification and approval of welding procedures for metallic materials - Part 125: Welding procedure tests for the arc welding of aluminium castings and combinations of cast to wrought material (Proposal for a European standard)
文件草案.焊接结构的质量保证.金属材料焊接程序的规范和批准.第125部分:铝铸件和铸造与锻造材料组合的电弧焊焊接程序试验（欧洲标准提案）

1995-08-01

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8/P-8/S-8, Group 1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下 带或不带衬垫的10至18 Gauge碳钢至奥氏体不锈钢（M-1至M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（Swps）

Standard WPS for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe App.
1/8至1/2“厚、INMs-1、ER70S-2和E7018的碳钢（M-1/P-1/S-1 第1组或第2组）在焊态或焊后热处理状态下用自耗嵌件进行钨极气体保护焊的标准WPS 主要用于管道应用

2001-10-31

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4" Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
1/8至3/4“厚E6010（垂直上坡）焊态碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准焊接工艺规范 主要用于管道应用

2019-03-01

Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch
碳钢（M-1/P-1/S-1）组1和2、1/8至1-1/2英寸的氩加25%二氧化碳气体保护金属极弧焊（短路过渡模式）和氩加2%氧气保护气体保护金属极弧焊（喷射过渡模式）的标准焊接工艺规范（Swps）

2006-01-01

Standard WPS for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4" Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
1/8至3/4“厚E6010（垂直下坡）和E7018（垂直上坡）碳钢（M-1/P-1/S-1 第1组或第2组）的保护金属极电弧焊标准WPS 焊接状态 主要用于管道应用

2019-03-01