ASTM F2899-11(2016)-条件1自行车叉的标准规格-国家数字标准馆

现行 ASTM F2899-11(2016)

到馆提醒

收藏跟踪

购买正版

Standard Specification for Condition 1 Bicycle Forks 条件1自行车叉的标准规格

发布日期： 2016-10-01

1.1
本标准规定了使用生产叉进行合格设计的测试要求，该生产叉拟用于每种分类的条件1
F2043
.

1.1
This standard establishes testing requirements for qualifying designs using production forks intended for use in Condition 1 per Classification
F2043
.

分类信息

发布单位或类别：美国-美国材料与试验协会

ICS分类： 43.150道路车辆工程 - 自行车

关联关系

研制信息

归口单位： F08.10

相似标准/计划/法规

ASTM F2274-11(2016)

Standard Specification for Condition 3 Bicycle Forks
条件3自行车叉的标准规格

Standard Specification for Condition 1 Bicycle Frames
条件1自行车车架的标准规范

Standard Specification for Condition 3 Bicycle Frames
条件3自行车架的标准规格

Standard Specification for Condition 0 Bicycle Frames
条件0自行车车架的标准规范

Standard Specification for Condition 2 Bicycle Frames
条件2自行车车架的标准规范

1A1W1S1 Archive Product 180

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 through 1/2 in. Thick, As-Welded Condition, As-Welded Condition, 1/8 through 1-1/2 in. Thick, PWHT Condition, ER80S-B2 and E801
1/8至1/2英寸铬钼钢（M-4/P-4 第1组或第2组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS）厚度焊接状态焊接状态 1/8至1-1/2英寸厚度焊后热处理条件 ER80S-B2和E801

AWS B2.1-4-218-1999(R2009)

Standard Welding Procedure Specification (SWPS) forShielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick,PWHT Condition, Primarily Pipe Applications
铬钼钢（M-4/P-4 第1组或第2组）屏蔽金属电弧焊的标准焊接工艺规范（SWPS） E8018-B2 1/8至1/2英寸厚如焊接状态；1/8至1-1/2英寸厚焊后热处理条件主要用于管道应用

AWS B2.1-5A-223-1999(R2009)

Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications
铬钼钢（M-5A/P-5A）的保护金属极电弧焊标准焊接工艺规范（SWPS） E9018-B3 1/8至1/2英寸厚如焊接状态；1/8至1-1/2英寸厚焊后热处理条件主要用于管道应用

AWS B2.1-1-012-2002(R2013)

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Carbon Steel (M-1, P-1, or S-1 to M-1, P-1, or S-1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下10至18 Gauge碳钢（M-1、P-1或S-1至M-1、P-1或S-1）带或不带衬垫的保护金属极电弧焊标准焊接工艺规范（Swps）

1A1W1S1 B2.1.004-90

Standard Welding Procedure Specification for Gas Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下10至18号规格碳钢（M-1 第1组）带或不带衬垫的气体保护金属极电弧焊的标准焊接工艺规范

AWS B2.1.012-91

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel, (M-1, Group 1), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下带或不带衬垫的10至18号规格碳钢（M-1 第1组）的保护金属极电弧焊的标准焊接工艺规范

AWS B2.1-1-018-1994

Standard Welding Procedure Specification for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E71T-8, As Welded Condition
1/8至1-1/2英寸厚E71T-8焊态碳钢（M-1/P-1/S-1 第1组或第2组）自保护药芯焊丝电弧焊的标准焊接工艺规范

AWS B2.1.001-90

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 3/4 inch, in the as-Welded Condition, With Backing
3/16至3/4英寸碳钢（M-1/P-1 第1组或第2组）在焊接状态下带衬垫的保护金属极电弧焊的标准焊接工艺规范

1A1W1S1 Archive Product 36

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
1/8至1-1/2英寸厚的焊态奥氏体不锈钢（M-8/P-8/S-8 第1组）的钨极气体保护焊标准焊接工艺规范

1A1W1S1 Archive Product 26

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition, With or Without Backing
3/16至7/8英寸碳钢（M-1/P-1 第1组或第2组）在焊接状态下带或不带衬垫的钨极气体保护焊的标准焊接工艺规范

1A1W1S1 Archive Product 408

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 3/4 INCH, IN THE AS WELDED CONDITIONS WITH BACKING
3/16至3/4英寸碳钢（M-1/P-1 第1组或第2组）在带衬垫的焊态条件下的保护金属极电弧焊标准焊接工艺规范（WPS）

AWS B2.1-4-217-1999(R2009)

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium- Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications
ER80S-B2 1/8至1/2英寸铬钼钢（M-4/P-4 1或2组）的钨极气体保护焊标准焊接工艺规范（WPS）厚度焊接状态 1/8至3/4英寸厚焊后热处理条件主要用于管道应用

AWS B2.1-5A-222-1999(R2009)

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 through 1/2 in. Thick, As-Welded Condition;1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications
ER90S-B3 1/8至1/2英寸铬钼钢（M-5A/P-5A）的钨极气体保护焊标准焊接工艺规范（SWPS）厚如焊接状态；1/8至3/4英寸厚焊后热处理条件主要用于管道应用

AWS B2.1-5A-224-1999(R2009)

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, ER90S-B3 and E9018-B3, Primarily Pipe Applic
1/8至1/2英寸铬钼钢（M-5A/P-5A）的气体保护钨极电弧焊后的标准焊接工艺规范（SWPS）厚如焊接状态；1/8至1-1/2英寸厚度焊后热处理条件 ER90S-B3和E9018-B3 主要用于管道应用

AWS B2.1-5A-226-1999(R2009)

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, IN521, ER90S-B3, and E9
1/8至1/2英寸铬钼钢（M-5A/P-5A）的气体保护钨极电弧焊（自耗镶块根部）和金属保护电弧焊的标准焊接工艺规范（SWPS）厚如焊接状态；1/8至1-1/2英寸厚度、焊后热处理条件、IN521、ER90S-B3和E9

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统