JEDEC JESD340(R2009)-CRE测量标准-国家数字标准馆

现行 JEDEC JESD340(R2009)

到馆提醒

收藏跟踪

购买正版

STANDARD FOR THE MEASUREMENT OF CRE CRE测量标准

发布日期： 1967-11-01

本标准提供了一个易于测量的参数，这是确定用于小信号操作的晶体管稳定性的重要特征之一。测量技术允许快速测试。其与交流稳定性的相关性将有助于建立设备的互换性。以前称为RS-340和/或EIA-340。

This standard offers an easily measured parameter which is one of the significant characteristics in determining the stability of a transistor intended for small-signal operation. The measurement technique allows rapid testing. Its correlation to AC stability will help to establish the interchangeability of a device. Formerly known as RS-340 and/or EIA-340.

分类信息

发布单位或类别：美国-(美国)固态技术协会,隶属EIA

关联关系

研制信息

相似标准/计划/法规

DOD DOD-P-63477/6

PIN, SPRING, TUBULAR, COILED, STANDARD DUTY, CRES 302, METRIC
标准负荷CRES 302公制盘绕管状弹簧销

DOD DOD-P-63477/7

PIN, SPRING, TUBULAR, SLOTTED, STANDARD DUTY, CRES 420, METRIC
标准负荷CRES 420公制开槽管状弹簧销

ASTM D6614/D6614M-20

Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method
纺织物拉伸性能的标准试验方法&x2013；CRE法

Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
弹性纱线弹性性能的标准试验方法（CRE型拉伸试验机）

ASTM D2653-07(2018)

Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
弹性纤维拉伸性能的标准试验方法（CRE型拉伸试验机）

Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
织物爆裂强度的标准试验方法恒定拉伸速率（CRE）球爆裂试验

JJF(铁道) 602-2004

铁路专用计量标准的测量不确定度
Uncertainty in Measurement for Special Measuring Standards of Railway

KS B 5338(2023 Confirm)

기준 줄자
标准卷尺

KS B 5338(2018 Confirm)

기준 줄자
标准卷尺

Turntable Measurement Standard
转台测量标准

PIN, STRAIGHT, HEADLESS--CRES, AMS 5735, DOWEL STANDARD AND OVERSIZE (SUPERSEDING MS9390B) (S/S BY SAE-AS9390B)
无头直销——CRES、AMS 5735、标准销和超大销（取代MS9390B）（由SAE-AS9390B提供）

JJF(铁道) 601-2004

铁路专用计量器具检定系统
Verification Scheme of Measurement for special Measuring Standards of Railway

API H00006-2001

Manual of Petroleum Measurement Standards Draft Standard- Measurement of Crude Oil by by Coriolis Meters
石油计量标准手册标准草案-用科里奥利流量计测量原油

MIL DSCC 89033D

CONNECTOR, ELECTRICAL, RECEPTACLE, RADIO FREQUENCY, SERIES TNC, SOCKET CONTACT, CRES BODIES, STANDARD SCREWS (SUPERSEDING DESC 89033A)
TNC系列射频插座电气连接器插座触点 CRES阀体标准螺钉（代替DESC 89033A）

标准测力杠杆
Standard Lever for Measuring Force

标准玻璃量器
Standard Capacity Measures(glass)

计量标准考核规范
Rule for the Examination of Measurement Standards

계기용 변성기(표준용 및 일반 계기용)
标准和测量用仪表变压器

Standard Practices for the Measurement of Radioactivity
放射性测量的标准实施规程

VDI/VDE 2655 Sheet 1.1

Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement
光学测量和显微地形图.粗糙度测量用干涉显微镜和深度测量标准的校准

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统