WINDOWS-SEALING. GLAZING SYSTEMS CLASSIFICATION AND DESIGNATION
窗户密封 玻璃系统分类和名称

1987-11-03

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals
塑料管道系统 玻璃纤维增强热固性塑料（GRP）组件 用弹性密封件证明刚性锁紧承插接头设计的试验方法

1997-05-15

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) COMPONENTS. TEST METHODS TO PROVE THE DESIGN OF RIGID LOCKED SOCKET-AND-SPIGOT JOINTS WITH ELASTOMERIC SEALS.
塑料管道系统 玻璃纤维增强热固性塑料（GRP）组件 用弹性密封件证明刚性锁紧承插接头设计的试验方法

1997-04-24

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
玻璃增强热固性塑料（GRP）管道和配件 - 用于证明锁定插座和插口接头（包括双插座接头）与弹性密封件的设计的测试方法

2021-04-30

Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
玻璃纤维增强热固性塑料（GRP）管道和配件 用弹性密封件证明锁紧承插接头（包括双承插接头）设计的试验方法

2021-05-12

Трубы и детали трубопроводов из реактопластов, армированных стекловолокном. Методы контроля конструкции раструбно-замковых соединений и соединений при помощи двойного раструба с эластомерными уплотнителями
玻璃钢热固性塑料管及部分管道 证明带弹性密封件的锁紧承插接头（包括双承插接头）设计的试验方法

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Dimensions, design, test methods and requirements for external and internal hex port plugs
流体动力和一般用途的连接 端口和螺柱端部采用ISO 261公制螺纹和O形密封圈 外部和内部六角端口插头的尺寸、设计、试验方法和要求

2006-06-30

Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
流体动力和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

2017-10-05

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
一般用途和流体动力的连接 端口和螺柱端部采用ISO 261螺纹 采用弹性体或金属对金属密封

2016-12-31

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
液压传动和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

2007-03-30

Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for light-duty (L series) stud ends
液压传动和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端

2007-03-30

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261螺纹和O形密封圈的端口和螺柱端第2部分:重型（S系列）螺柱端尺寸、设计、试验方法和要求

2007-12-21

Аккумуляторы и аккумуляторные батареи, содержащие щелочной или другие некислотные электролиты. Герметичные никель-металлгидридные аккумуляторы и модули для промышленного использования. Часть 1. Требования к маркировке и обозначению. Методы испытаний для определения рабочих характеристик
含有碱性或其他非酸性电解质的二次电池和电池 工业用二次密封镍金属氢化物电池和电池 第1部分 标签和名称要求 性能试验方法

Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
用于流体动力和一般用途的连接 - ISO 261公制螺纹和O形密封圈的端口和螺柱端 - 第4部分:外部六角和内六角螺栓插头的尺寸 设计 测试方法和要求

2017-08-09

Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
一般用途和流体动力的连接 - 具有ISO 261螺纹的端口和螺柱端头 具有弹性或金属对金属密封 - 第4部分:外部六角和内六角螺栓插头的尺寸 设计 测试方法和要求

2016-11-24

Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods (Stabilized: Jan 2017)
流体动力和高压用连接件.带ISO 261螺纹和O形密封圈的端口、螺柱端和插头.第3部分:端口插头要求、尺寸、设计和试验方法（2017年1月）

2017-01-04

Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing, Part 3: Light-Duty (L Series) Stud Ends--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261公制螺纹和O形密封圈的端口和螺柱端 第3部分:轻型（L系列）螺柱端尺寸、设计、试验方法和要求

2007-12-21

Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 2: Stud End Requirements, Dimensions, Design, and Test Methods (Stabilized: Feb 2017)
流体动力和高压用连接件.带ISO 261螺纹和O形密封圈的端口、螺柱端和塞子.第2部分:螺柱端要求、尺寸、设计和试验方法（稳定:2017年2月）

2017-02-08

Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
液压传动和通用连接件——带ISO 261公制螺纹和O形密封圈的端口和螺柱端第3部分:轻型（L系列）螺柱端的尺寸、设计、试验方法和要求

2006-02-16

Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
液压传动和通用连接件——带ISO 261公制螺纹和O形密封圈的端口和螺柱端第2部分:重型（S系列）螺柱端的尺寸、设计、试验方法和要求

2006-02-16