现行

MIL MS51497 Notice 1-Inactivation

STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
螺柱 锁定在环内 锯齿状 高强度 超大更换件

1997-07-18

现行

MIL MS51497

STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
螺柱 锁环锁紧 锯齿形 高强度 超大替换件

1985-03-11

现行

SAE AS51997C

RING, LOCK, SERRATED-HIGH STRENGTH
锁紧齿圈-高强度

2020-01-07

现行

SAE AS51989C

STUD, LOCKED IN-RING LOCKED, SERRATED
螺柱 锁紧环锁紧 锯齿形

2018-09-28

现行

MIL MS51992B Amendment 1

STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH (SUPERSEDING MS51992A) (S/S BY SAE-AS51992)
高强度环内锁紧锯齿形双头螺栓（取代MS51992A）（由SAE-AS51992提供）

1996-03-26

现行

MIL MS51992B Notice 1-Cancellation

STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH (SUPERSEDING MS51992A) (S/S BY SAE-AS51992)
高强度环内锁紧锯齿形双头螺栓（取代MS51992A）（由SAE-AS51992提供）

1999-10-15

现行

MIL MS51992B

STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH (SUPERSEDING MS51992A) (S/S BY SAE-AS51992)
高强度锁紧齿圈螺柱（取代MS51992A）（由SAE-AS51992提供）

1985-05-12

现行

KS W 1611(2019 Confirm)

항공우주 - 톱니형 링 잠금스터드
航空航天锯齿环锁紧螺柱

2004-09-07

现行

SAE AS45909A

Stud, Locked In, Ring Locked, Serrated, General Specification For
螺柱 锁定 环锁定 锯齿形 通用规范

2015-12-06

现行

NASM 45909 Rev.2

Stud, Locked in, Ring Locked, Serrated, General Specification for
锯齿形锁紧环形螺柱通用规范

2016-05-31

现行

MIL MS51993B Notice 1-Validation 1

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入 螺纹锁定 锁定 锯齿 高强度

2019-02-15

现行

MIL MS51993B

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入件 螺纹锁定 环锁定 锯齿状 高强度

2012-11-01

现行

MIL MS51993B Amendment 1(amendment incorporated)

Insert, Screw Thread-Locked in, Ring Locked, Serrated, High Strength
插入件 螺纹锁定 环锁定 锯齿状 高强度

2014-02-04

现行

MIL MS51999 Notice 3-Validation 3

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
STUD LOCKED IN-RING LOCKED SERRATED DESIGN AND USAGE LIMITATIONS FOR

2006-08-25

现行

MIL MS51999 Notice 4-Validation 4

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
锁定在环内的锯齿形双头螺栓 设计和使用限制

2019-07-24

现行

MIL MS51999 Notice 1-Validation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
STUD LOCKED IN-RING LOCKED SERRATED DESIGN AND USAGE LIMITATIONS FOR

1988-05-20

现行

MIL MS51999 Notice 2-Validation 2

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
锁定在环内的锯齿形双头螺栓 设计和使用限制

2001-09-14

现行

MIL MS51999

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
锁紧螺柱-齿形锁紧环 设计和使用限制

1967-12-12

现行

MIL MS51498 Amendment 1

INSERT,SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
插入件 螺纹锁紧 环锁紧 锯齿状 高强度 超大更换件

1997-08-06

现行

MIL MS51993A Amendment 1

INSERT, SCREW THREAD - LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH (SUPERSEDING MS51993)
螺纹锁紧、环锁紧、锯齿状、高强度插入件（取代MS51993）

1997-08-06