IEC 61968的这一部分的范围是对一系列功能的描述，这些功能是 真皮功能的企业集成。这些交换很可能发生在真皮和DMS之间。然而，由于这是一个企业集成标准，可以利用IEC 61968-100:2013进行应用程序集成（使用web服务或JMS）或其他松散耦合的实现，因此DERM可能与之交换信息的系统没有技术限制。此外，还应注意，DERM可能使用各种标准和协议（如IEC 61850、IEEE 2030.5、， 配电网协议（DNP）、Sunspec Modbus或开放式现场消息总线（OpenFMB）。DERM的一个作用是代表系统操作员管理通信的这种差异和复杂性。 然而，与个人DER的沟通不在本标准的范围内。请读者参考这些标准，以了解与单个DERs智能逆变器的通信。购买本文件时可获得的所有当前修订均包含在购买本文件中。

The scope of this part of IEC 61968 is the description of a set of functions that are needed for enterprise integration of DERMS functions. These exchanges are most likely between a DERMS and a DMS. However, since this is an enterprise integration standard which may leverage IEC 61968-100:2013 for application integration (using web services or JMS) or other loosely-coupled implementations, there are no technical limitations for systems with which a DERMS might exchange information. Also, it should be noted that a DERMS might communicate with individual DER using a variety of standards and protocols such as IEC 61850, IEEE 2030.5, Distribution Network Protocol (DNP), Sunspec Modbus, or perhaps Open Field Message Bus (OpenFMB). One role of the DERMS is to manage this disparity and complexity of communications on the behalf of the system operator. However, the communication to individual DER is out of scope of this standard. Readers are invited to look to those standards to understand communication to individual DERs' smart inverter.All current amendments available at time of purchase are included with the purchase of this document.