请注意:此版本的所有临时修订版将在您购买时提供。这些要求涵盖了设备的结构和安全性，这些设备在按照授权机构的预期操作时自动分配货币 并对未经授权的货币转移提供有限程度的保护。如果产品也收到沉积物，也应为沉积物提供相同程度的保护。应做好记录，以便授权客户可以从中扣除分配的货币。对未经授权的行为提供有限程度的保护 应提供会妨碍正确借记的记录的操作或删除。出纳员的提款机不需要做记录。这些要求包括用于永久连接到600的产品- 电压或更低的分支电路，以及用于电线的产品 连接至300伏或更低电位的分支电路。分支电路及其为装置供电的方式应符合 国家电气规范，ANSI/NFPA 70。包含新特性、特性、组件、材料或系统的产品，或与本标准要求涵盖的产品不同的产品，以及 涉及火灾、触电或人身伤害风险的，应使用适当的附加组件和最终产品要求进行评估，以 保持本标准意图最初预期的安全水平。特性、特性、组件、材料或系统发生冲突的产品 本标准的具体要求或规定不符合本标准。 要求的修订应以一致的方式提出和采用 制定、修订和实施本标准所采用的方法。

Please note: All interim revisions for this edition available at time of your purchase will be included.These requirements cover the construction and security of equipment intended to automatically dispense currency when operated as intended by an authorized customer, and to provide a limited degree of protection against unauthorized removal of currency.If the product also receives deposits, the same degree of protection shall also be provided for the deposits.Records shall be made in order that the authorized customer may be debited for the currency dispensed. A limited degree of protection against unauthorized manipulation or removal of the records that will prevent proper debit shall be provided.A teller's cash dispenser is not required to make records.These requirements cover products intended for permanent connection to 600-volts or lower-potential branch circuits, and products intended for cord connection to 300-volt or lower-potential branch circuits. The branch circuits and the means of supplying the units from them are intended to comply with the National Electrical Code, ANSI/NFPA 70.A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.