现行

FED FF-S-1362A

Stud, Plain, General Purpose
普通通用螺柱

2014-10-08

现行

FED FF-S-1362A

Stud, Plain, General Purpose
普通通用螺柱

2014-10-08

现行

MIL MS51864 Notice 1-Validation

STUD-PLAIN, GENERAL PURPOSE
螺旋平原 通用

1988-06-01

现行

MIL MS51864

STUD-PLAIN, GENERAL PURPOSE
普通螺柱

1970-04-30

现行

BS 2693-1-1956

Specification for screwed studs-General purpose studs
螺纹螺柱规范 通用螺柱

1956-01-30

现行

BS 4439-1969

Specification for screwed studs for general purposes. Metric series
通用螺纹螺柱规范 公制系列

1969-02-28

现行

JB/T 8949.1-2013

普通整流管 第1部分：螺栓形器件
General purpose rectifier diodes-Part 1:Stud devices

2013-04-25

现行

GOST 8288-1974

Затворы плоские для бункеров общего назначения. Основные присоединительные размеры
通用地堡的平原门 基本和连接尺寸

现行

BS EN ISO 887-2000

Plain washers for metric bolts, screws and nuts for general purposes. General plan
通用公制螺栓、螺钉和螺母用平垫圈 总体规划

2007-04-30

现行

KS B ISO 887(2020 Confirm)

일반용 미터 볼트, 스크루 및 너트에 대한 평와셔 - 통칙
平垫圈米制螺栓 一般用途螺丝andnuts - 总体规划

2004-09-30

现行

ISO 887-2000

Plain washers for metric bolts, screws and nuts for general purposes — General plan
通用公制螺栓、螺钉和螺母用平垫圈——总体规划

2000-06-08

现行

JIS B 1250-2008

Plain washers for metric bolts, screws and nuts for general purposes -- General plan
通用公制螺栓、螺钉和螺母用平垫圈总平面图

2008-01-01

现行

KS B 1065(2020 Confirm)

수나사 부품－호칭 길이 및볼트의 나사부 길이
螺栓 螺钉和螺柱-公称长度andthread一般用途螺栓长度

2015-12-31

现行

JIS B 1009-1991

Bolts, screws and studs -- Nominal lengths, and thread lengths for general purpose bolts
螺栓、螺钉和螺柱通用螺栓的公称长度和螺纹长度

1991-01-01

现行

AS 1237.1-2002

Plain washers for metric bolts, screws and nuts for general purposes, Part 1: General plan
通用公制螺栓、螺钉和螺母用平垫圈第1部分:总平面图

2002-09-27

现行

MIL MS27951A Notice 2-Inactivation

STUB (STUD), WELDING-TURNBUCKLE (GENERAL PURPOSE, MANUAL WELD APPLICATION) (SUPERSEDING MS27951)
焊接螺丝扣短柱（双头螺栓）（通用 手动焊接应用）（取代MS27951）

1997-07-18

现行

MIL MS27951A Notice 1-Validation

STUB (STUD), WELDING-TURNBUCKLE (GENERAL PURPOSE, MANUAL WELD APPLICATION) (SUPERSEDING MS27951)
STUB（STUD） 焊接TURNBUCKLE（一般用途 手动焊接应用）（取代MS27951）

1988-06-06

现行

MIL MS27951A

STUB (STUD), WELDING-TURNBUCKLE (GENERAL PURPOSE, MANUAL WELD APPLICATION) (SUPERSEDING MS27951)
螺柱 焊接螺丝扣（通用 手动焊接应用）（替代MS27951）

1969-03-21

现行

UNE-EN ISO 887-2000

Plain washers for metric bolts, screws and nuts for general purposes - General plan. (ISO 887:2000).
通用公制螺栓、螺钉和螺母用平垫圈.总平面图 （ISO 887:2000）

2000-12-12

现行

ISO 262-2023

ISO general purpose metric screw threads — Selected sizes for bolts, screws, studs and nuts
ISO通用公制螺纹-螺栓、螺钉、螺柱和螺母的选定尺寸

2023-04-20