BS 4439:1969-通用螺纹螺柱规范公制系列-国家数字标准馆

现行 BS 4439:1969

到馆阅读

收藏跟踪

购买正版

Specification for screwed studs for general purposes. Metric series 通用螺纹螺柱规范公制系列

发布日期： 1969-02-28

一般用途的直径为3 mm至39 mm（含3 mm）的ISO公制螺纹螺柱的尺寸和公差。仅给出了碳钢或合金钢螺纹螺柱的机械性能，这些螺柱不用于特殊应用，例如需要焊接性或耐腐蚀性的应用。给出的尺寸要求也适用于有色金属和不锈钢螺纹螺柱。形成与BS 2693:第1部分平行的公制标准。交叉引用:BS 18BS 21BS 84BS 131:第3BS 240部分:第1部分对BS 350的补充:第2BS 427部分:第1BS 891部分:第1BS 1580BS 2693部分:第1BS 2693部分:第2BS 3382BS 3580BS 3643部分:第1BS 3643部分:第2BS 3763PD 5686部分

Dimensions and tolerances for screwed studs with ISO metric threads in diameters from 3 mm to 39 mm inclusive, intended for general purposes. Mechanical properties are given only in respect of carbon or alloy steel screwed studs which are not being used for special applications, such as those requiring weldability or corrosion resistance. Dimensional requirements given also apply to non-ferrous and stainless steel screwed studs. Forms a parallel metric standard to BS 2693:Part 1.Cross References:BS 18BS 21BS 84BS 131:Part 3BS 240:Part 1Supplement No. 1 to BS 350:Part 2BS 427:Part 1BS 891:Part 1BS 1580BS 2693:Part 1BS 2693:Part 2BS 3382BS 3580BS 3643:Part 1BS 3643:Part 2BS 3763PD 5686

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Specification for screwed studs-General purpose studs
螺纹螺柱规范通用螺柱

ISO general purpose metric screw threads — Selected sizes for bolts, screws, studs and nuts
ISO通用公制螺纹-螺栓、螺钉、螺柱和螺母的选定尺寸

BS ISO 885-2000

General purpose bolts and screws. Metric series. Radii under the head
通用螺栓和螺钉公制系列头下半径

GENERAL PURPOSE BOLTS AND SCREWS - METRIC SERIES - RADII UNDER THE HEAD.
通用螺栓和螺钉.米制系列.头下半径

JIS B 1005-2003

General purpose bolts and screws -- Metric series -- Radii under the head
通用螺栓和螺钉米制系列头下半径

General purpose bolts and screws — Metric series — Radii under the head
通用螺栓和螺钉——公制系列——头下半径

ASTM F788/F788M-20e1

Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
英制和公制系列螺栓、螺钉、双头螺栓和铆钉表面不连续性的标准规范

Specification for bifurcated rivets for general purpose use (metric series)
通用分叉铆钉规范（米制系列）

Specification for crinkle washers for general engineering purposes. Metric series
一般工程用起皱垫圈规范公制系列

ASTM F468M-06(2018)

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
通用六角带帽螺钉和螺柱用有色金属螺栓的标准规范（米制）

General purpose bolts and screws - Metric series - Radii under the head (ISO 885:2000)
通用螺栓和螺钉米制系列头下半径

Specification for spring washers for general engineering and automobile purposes. Metric series
一般工程和汽车用弹簧垫圈规范公制系列

DOD DOD-S-63275A

STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC & RING, LOCK, SERRATED, METRIC, GENERAL SPECIFICATION FOR (SUPERSEDING DOD-S-63275)
米制和米制带齿锁紧环锁紧锁紧内螺纹双头螺栓通用规范（替代DOD-S-63275）

Specification for parallel steel dowel pins-Parallel and taper types having screw threads for extraction purposes. Metric series
平行钢暗销规范

Geometrical product specifications (GPS) - GO and NOT GO screw plug gauges for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何规格（GPS）-“通”和“不通”螺纹塞规适用于标称直径为1 mm至40 mm的ISO通用公制螺纹

Geometrical product specifications (GPS) - GO screw ring gauges for ISO metric screw threads - Part 1: Nominal diameters from 1 mm up to 200 mm for general purposes
产品几何技术规范（GPS）ISO米制螺纹用“GO”螺纹环量规第1部分:一般用途公称直径1 mm至200 mm

Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“不合格”螺纹塞规.第2部分:“不合格”车间量规.公称直径超过40mm至200mm的ISO通用公制螺纹塞规的检查和设置

Geometrical product specifications (GPS) - GO workshop screw plug gauges, check and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何规范（GPS）-“GO”螺纹塞规.第1部分:“GO”车间量规.公称直径为1mm至40mm的ISO通用公制螺纹用塞规的检查和设置

Geometrical product specifications (GPS) - NOT GO workhop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何技术规范（GPS）-“不合格”螺纹塞规.第1部分:“不合格”车间量规.公称直径为1mm至40mm的ISO通用公制螺纹塞规的检查和设置

Geometrical product specifications (GPS) - GO workshop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters over 40 mm up to 200 mm
产品几何技术规范（GPS）-“GO”螺纹塞规.第2部分:“GO”车间量规.公称直径超过40mm至200mm的ISO通用公制螺纹塞规的检查和设置

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统