本欧洲标准是系统能量需求计算方法和空间采暖系统和家庭热水系统系统效率的一系列标准的一部分。 本标准（FprEN 15316 4 1）规定: - 所需输入; - 计算方法; - 产出; - 考虑到基于燃料燃烧的发热装置的能量性能的方法; 用于燃烧子系统（锅炉，生物质）的空间加热生成，包括控制。 本标准规定了计算方法: - 加热和家用热水生产系统的热损失; - 采暖和家庭热水发电系统空间供热的可回收热损失; - 加热辅助能源和家用热水发电系统。 该标准规定了水基发热子系统的能源性能计算，包括基于燃烧（“锅炉”）燃烧的控制，使用常规化石燃料和可再生燃料。本标准不包括锅炉的尺寸或检验。 本标准也适用于家庭热水，通风，制冷和供暖的加热或组合使用的发电机。发电机家用热水

This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies of space heating systems and domestic hot water systems. This standard (EN 15316 4 1) specifies: - required inputs; - a calculation method; - resulting outputs; - a method to take into account the energy performance of heat generation devices based on fuel combustion; for space heating generation by combustion sub-systems (boilers, biomass), including control. This standard specifies methods for the calculation of: - thermal losses from the heating and the domestic hot water generation system; - recoverable thermal losses for space heating from the heating and the domestic hot water generation system; - auxiliary energy of the heating and the domestic hot water generation systems. This standard specifies the energy performance calculation of water based heat generation sub-systems including control based on combustion of fuels ("boilers"), operating with conventional fossil fuels as well as renewable fuels. This standard does not cover sizing or inspection of boilers. This standard is also applicable to heat generators for heating or for combined service as domestic hot water, ventilation, cooling and heating. Generators for domestic hot water only are taken into account into part M8-8. This European Standard is the general standard on generation by combustion sub-systems (boilers, biomass) and is also intended for generation for domestic hot water production and/or space heating. These values are input data for calculation of the overall energy use according to EN ISO 52000 1 and EN 15316 1. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1. NOTE 1 In CEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.