API MPMS Chapter 4.7-现场标准测试措施第三版-国家数字标准馆

现行 API MPMS Chapter 4.7

到馆提醒

收藏跟踪

购买正版

Field Standard Test Measures, Third Edition 现场标准测试措施第三版

发布日期： 2009-04-01

本标准通过提供说明、施工要求以及检查、处理和校准方法，详细说明了现场标准试验措施的基本要素。本文件中未涉及下颈部刻度测试措施和校准罐。本标准的范围仅限于测试措施“交付量”的认证。

This standard details the essential elements of field standard test measures by providing descriptions, construction requirements, as well as inspection, handling, and calibration methods. Bottom-neck scale test measures and prover tanks are not addressed in this document. The scope of this standard is limited to the certification of "delivered volumes" of test measures.

分类信息

发布单位或类别：美国-美国石油学会

关联关系

研制信息

相似标准/计划/法规

Standard Test Method for Field Measurement of Electrochemical Impedance on Coatings and Linings
涂层和衬里电化学阻抗现场测量的标准试验方法

ASTM D6391-11(2020)

Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
使用井眼渗透现场测量液压电导率的标准测试方法

Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
爆破清洁钢表面轮廓的现场测量标准测试方法

ASTM F2975-12(2022)

Standard Test Method for Measuring the Field Performance of Commercial Kitchen Ventilation Systems
商用厨房通风系统现场性能测量的标准试验方法

API MPMS Chapter 10.9-2013(R2018)

API MPMS Chapter 10-Sediment and Water - Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration, Third Edition
API MPMS第10章沉积物和水-第9节-库仑卡尔费休滴定法测定原油中水的标准试验方法第三版

CAN/CSA-IEC 61000-4-4-16(R2021)

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test (Adopted IEC 61000-4-4:2012, third edition, 2012-04)
电磁兼容性（EMC）.第4-4部分:试验和测量技术.电快速瞬变/脉冲群抗扰度试验（采用IEC 61000-4-4:2012 第三版 2012-04）

Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
野外测量水平和低倾斜表面的太阳反射率的标准试验方法

ASTM E1124-10(2024)

Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
通过双面法测量声功率级的标准测试方法

Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
用改进的Philip Dunne渗透仪试验测量现场渗透率和计算现场水力传导率的标准实施规程

API MPMS Chapter 22.2-2017(R2022)

Manual of Petroleum Measurement Standards, Chapter 22-Testing Protocol Section 2-Differential Pressure Flow Measurement Devices, Second Edition
石油测量标准手册第22章测试协议第2节-差压流量测量装置第二版

ASTM E783-02(2018)

Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
通过安装的外门窗进行空气泄漏现场测量的标准试验方法

ASTM E1696-15(2022)

Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
使用便携式反光仪现场测量凸起反光路面标志的标准试验方法

Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
用磁场或涡流（电磁）试验方法测量涂层厚度的标准实施规程

Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
使用A加权和三分之一倍频程声压级测量和报告掩蔽声级的标准试验方法

API MPMS Chapter 22.7-2023

API Manual of Petroleum Measurement Standards Chapter 22.7, EI HM 77, Testing Protocol for Multiphase Meter, First Edition
API石油计量标准手册第22.7章 EI HM 77 多相流量计测试协议第一版

CAN/CSA-IEC 61000-4-8-12(R2022)

Electromagnetic Compatibility (EMC) - Part 4-8: Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test (Adopted IEC 61000-4-8:2009, second edition, 2009-09)
电磁兼容性（EMC）.第4-8部分:试验和测量技术.工频磁场抗扰度试验（采用IEC 61000-4-8-2009 第二版 2009-09）

ANSI C82.77-3-2020

American National Standard for Lighting Equipment - Electromagnetic Compatibility (EMC) Testing and Measurement Techniques - Radiated, Radio-Frequency Electromagnetic Field Immunity Test
美国照明设备国家标准.电磁兼容性（EMC）试验和测量技术.辐射射频电磁场抗扰度试验

Piezoelectric ceramic resonators and resonator units for frequency control and selection; standard values and conditions; measuring and test conditions; identical with IEC 60642, edition 1979
用于频率控制和选择的压电陶瓷谐振器和谐振器单元；标准值和条件；测量和测试条件；与1979年版IEC 60642相同

ASHRAE 221-2020

Standard 221-2020 -- Test Method to Field-Measure and Score the Cooling and Heating Performance of an Installed Unitary HVAC System (ANSI Approved)
标准221-2020——现场测量和评分已安装整体式HVAC系统冷却和加热性能的试验方法（ANSI批准）

Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
通过地板天花板组件和相关支撑结构现场测量攻丝机冲击声传播的标准试验方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统