钨极惰性气体保护焊工艺方法
Welding procedure specification for gas tungsten arc welding

1999-06-24

ASME Weld Procedure for Joining Stainless Steel By Gas Tungsten ARC Welding (GTAW) Wire
ASME用钨极气体保护焊（GTAW）焊丝连接不锈钢的焊接程序

2019-09-01

Specification and qualification of welding procedures for metallic materials. Welding procedure test-Arc and gas welding of steels and arc welding of nickel and nickel alloys
金属材料焊接程序的规范和鉴定 焊接工艺试验

2019-08-21

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Galvanized Steel (M-1), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号镀锌钢（M-1）带或不带衬垫的钨极气体保护焊标准焊接工艺规范（Swps）

2002-01-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Aluminum, (M-22 or P-22), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下 带或不带衬垫的10至18号铝（M-22或P-22）气体保护钨极电弧焊的标准焊接工艺规范

1991-01-01

금속재료 용접절차의 시방과 자격인정 — 용접절차시험 — 제1부: 강의 아크 및가스 용접과 니켈과 니켈합금의 아크 용접
金属材料焊接程序规范和资格 - 焊接程序试验 - 第1部分:镍和镍合金的钢和电弧焊接的电弧和气体焊接

2018-11-29

금속재료 용접절차의 시방과 자격인정 — 용접절차 시험 — 제1부: 강의 아크 용접과 가스 용접 및 니켈과 니켈합금의 아크 용접
金属材料焊接工艺规范和评定焊接工艺试验第1部分:钢的电弧焊和气焊以及镍和镍合金的电弧焊

2023-11-10

Технические требования и аттестация процедур сварки металлических материалов. Проверка процедуры сварки. Часть 1. Дуговая и газовая сварка сталей и дуговая сварка никеля и никелевых сплавов
金属材料焊接程序的规格和资格 焊接程序试验 第1部分:电弧和气体焊接镍和镍合金的钢和电弧焊

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
金属材料焊接程序的规范和资格 - 焊接程序试验 - 第1部分:镍和镍合金钢和弧焊的弧焊和气焊

2017-05-29

Specification and qualification of welding procedures for metallic materials. Welding procedure test-Arc and gas welding of copper and its alloys
金属材料焊接程序的规范和鉴定 焊接工艺试验

2006-04-28

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys — Amendment 1
金属材料焊接工艺的规范和评定.焊接工艺试验.第1部分:钢的电弧焊和气焊以及镍和镍合金的电弧焊.修改件1

2019-07-09

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys
金属材料焊接工艺规范和评定——焊接工艺试验第6部分:铜及其合金的电弧焊和气焊

2006-03-20

Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)
金属材料焊接程序的规范和鉴定 焊接工艺试验 第1部分:钢的电弧焊和气焊以及镍和镍合金的电弧焊（ISO 15614-1-2004）

2005-03-30

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Aluminum (M/P/S-22 to M/P/S-22), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号铝（M/P/S-22至M/P/S-22）带或不带衬垫的钨极气体保护焊标准焊接工艺规范（Swps）

2010-07-07

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号奥氏体不锈钢（M-8、P-8或S-8）带或不带衬垫的钨极气体保护焊标准焊接工艺规范（Swps）

2002-01-01

Suggested Arc-Welding Procedures for Steels Meeting Standard Specifications
符合标准规范的钢的建议电弧焊程序

Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
焊接状态下1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范

2001-10-31

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the As-Welded Condition, With or Without Backing
3/16至7/8英寸碳钢（M-1/P-1 第1组或第2组）在焊接状态下 带或不带衬垫的钨极气体保护焊的标准焊接工艺规范

1990-01-01

STANDARD WELDING PROCEDURE SPECIFICATION(WPS) FOR; GAS TUNGSTEN ARC WELDISTANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER309(L), AS-WELDED
标准焊接工艺规范（WPS）；钨极气体保护焊1/16至1-1/2英寸厚ER309（L）焊态奥氏体不锈钢（M-8/P-8/S-8 1组）与碳钢（M-1/P-1/S-1 1或2组）的钨极气体保护焊标准焊接工艺规范（SWPS）

2002-08-28

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 7/8 INCH, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
3/16至7/8英寸碳钢（M-1/P-1 第1组或第2组）焊态钨极气体保护焊标准焊接工艺规范（WPS） 带或不带衬垫

1989-12-18