IEC 60095-1:2018 RLV-铅酸起动蓄电池第1部分:一般要求和试验方法-国家数字标准馆

现行 IEC 60095-1:2018 RLV

到馆提醒

收藏跟踪

购买正版

Lead-acid starter batteries - Part 1: General requirements and methods of test 铅酸起动蓄电池第1部分:一般要求和试验方法

发布日期： 2018-11-16

                IEC 60095-1:20 18 RLV包含官方IEC国际标准及其红线版本。Redline版本不是官方文档，它只有英文版本，为您提供了一种快速简单的方法来比较IEC官方标准与其以前版本之间的所有变化。

IEC 60095-1:20 18适用于标称电压为12 V的铅酸蓄电池，主要用作内燃机启动、照明和内燃机车辆辅助设备的电源。这些电池通常被称为“启动电池”。
本文件适用于以下用途的电池:
？乘用车用电池；
？商用和工业车辆用电池。
IEC 60095-1:20 18不适用于其他用途的电池，例如启动轨道车内燃机或摩托车和其他动力运动车辆。IEC 60095-1:20 18定义了铅酸电池的许多一般特性。单个部分可以在IEC 60095系列的其他部分中引用，即使该应用被排除在本文件的范围之外。本文件规定:
？一般要求；
？必要的功能特性、相关测试方法和结果，
对于几类起动机电池:
？根据应用的一般类型；
？根据产品的类型。
IEC 60095-1:20 18取消并取代了2006年发布的第七版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更:
a)充电验收试验；
b)起动性能试验；
c)电荷保持试验；和
d）增加了耐久性试验。

IEC 60095-1:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.

IEC 60095-1:2018 is applicable to lead-acid batteries with a nominal voltage of 12 V, used primarily as a power source for the starting of internal combustion engines, lighting, and for auxiliary equipment of internal combustion engine vehicles. These batteries are commonly called "starter batteries".

This document is applicable to batteries for the following purposes:

？ batteries for passenger cars;

？ batteries for commercial and industrial vehicles.

IEC 60095-1:2018 is not applicable to batteries for other purposes, such as the starting of railcar internal combustion engines or for motorcycles and other power sport vehicles. IEC 60095-1:2018 defines many general properties of lead-acid batteries. Single sections can be referenced in other parts of the IEC 60095 series even if the application is excluded in the scope of this document. This document specifies the:

？ general requirements;

？ essential functional characteristics, relevant test methods and results required,

for several classes of starter batteries:

？ according to the general type of application;

？ according to the type of product.

IEC 60095-1:2018 cancels and replaces the seventh edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:

a) charge acceptance test;

b) cranking performance test;

c) charge retention test; and

d) endurance test added.