IEC 60317-82:2020规定了200级漆包矩形铜绕组线的要求，其底涂层基于聚酯酰亚胺树脂，只要保留原始树脂的化学特性并满足所有规定的电线要求，就可以对其进行改性。 便条？改性树脂是经过化学变化或含有一种或多种添加剂以增强某些性能或应用特性的树脂。 本文件涵盖的标称导体尺寸范围为: 宽度:最小。2.0 mm最大16.0 mm； 厚度:最小。最大0.80毫米。5.60毫米。 本规范包括1级和2级导线，适用于所有导线。IEC 60317-0-2中给出了宽度和厚度的规定组合以及规定的宽度/厚度比。

IEC 60317-82: 2020 specifies the requirements of enamelled rectangular copper winding wires of class 200 with a sole coating based on polyesterimide resin, which can be modified provided it retains the chemical identity of the original resin and meets all specified wire requirements.
NOTE？A modified resin is a resin that has undergone a chemical change or contains one or more additives to enhance certain performance or application characteristics.
The range of nominal conductor dimensions covered by this document is:

• width: min. 2,0 mm max. 16,0 mm;
• thickness: min. 0,80 mm max. 5,60 mm.

Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified width/thickness ratio are given in IEC 60317-0-2.