IEC 60317-74:2018规定了180级漆包矩形铝绕组线的要求，其底涂层基于聚酯酰亚胺树脂，只要保留原始树脂的化学特性并满足所有规定的电线要求，就可以对其进行改性。注改性树脂是经过化学变化的树脂，或含有一种或多种添加剂以增强某些性能或应用特性的树脂。本标准涵盖的标称导体尺寸范围为: -宽度:最小。2.0 mm-最大16.0 mm； -厚度:最小。最大0.80毫米。5.60毫米。 本规范包括1级和2级导线，适用于所有导线。IEC 60317-0-9:20 15中给出了宽度和厚度的规定组合以及规定的宽度/厚度比。 关键词:绕组用绝缘导线

IEC 60317-74:2018 specifies the requirements of enamelled rectangular aluminium winding wire of class 180 with a sole coating based on polyesterimide resin, which can be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor dimensions covered by this standard is:
- width: min. 2,0 mm - max. 16,0 mm;
- thickness: min. 0,80 mm - max. 5,60 mm.
Wires of grade 1 and grade 2 are included in this specification and apply to the complete range of conductors. The specified combinations of width and thickness as well as the specified width/thickness ratio are given in IEC 60317-0-9:2015.
Keywords: insulated wires used for windings