IEC 60317-33:2015（E）规定了聚酯玻璃纤维缠绕、浸渍、裸或漆包矩形铜绕组线的要求，温度指数200。本标准涵盖的标称导体尺寸范围为: -宽度:最小2.0 mm最大16.0 mm； -厚度:最小0.80 mm最大5.60 mm。规定的宽度和厚度组合以及规定的宽度/厚度比符合IEC 60317-0-4。这第二版取消并取代了1990年出版的第一版，修正案1:19 97和修正案2:20 05。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更: -新的3.2.2载有关于绕组线的一般注释，以前是范围的一部分； -在3中的1级漆包线上引入玻璃纤维覆盖层。2.2; -修订IEC 60317-0-4的参考文献，以明确其应用是规范性的。 关键词:温度指数200绕组线 本出版物应与IEC 60317-0-4:20 15一起阅读。

IEC 60317-33:2015(E) specifies the requirements of polyester glass fibre wound, impregnated, bare or enamelled rectangular copper winding wire, temperature index 200. The range of nominal conductor dimensions covered by this standard is:
- width: min 2,0 mm max 16,0 mm;
- thickness: min 0,80 mm max 5,60 mm. The specified combinations of width and thickness as well as the specified width/thickness ratio are according to IEC 60317-0-4. This second edition cancels and replaces the first edition published in 1990, Amendment 1:1997 and Amendment 2:2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- new 3.2.2 containing general notes on winding wire, formerly part of the scope;
- introduction of glass fibre coverings over grade 1 enamelled conductor in 3.2.2;
- revision to references to IEC 60317-0-4 to make clear that their application is normative. Keywords: temperature index 200, winding wire

This publication is to be read in conjunction with IEC 60317-0-4:2015.