ISO 6397:2024-航空航天.涂覆或未涂覆的金属材料六角头试验螺栓-国家数字标准馆

现行 ISO 6397:2024

到馆提醒

收藏跟踪

购买正版

Aerospace — Test bolts, hexagonal head, metallic material, coated or uncoated 航空航天.涂覆或未涂覆的金属材料六角头试验螺栓

发布日期： 2024-05-08

本文件规定了带MJ螺纹的金属六角头螺栓的尺寸，有涂层或无涂层。它适用于测试螺栓的扭矩和张力测试。

This document specifies the dimensions of hexagonal head bolts, with MJ threads, metallic, coated or uncoated. It is applicable to test bolts for torque and tension tests.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 49.030.20航空航天制造用紧固件 - 螺栓、螺钉、螺柱

关联关系

研制信息

归口单位： ISO/TC 20/SC 4

相似标准/计划/法规

现行

KS W 0931(2018 Confirm)

항공 우주 - 정육각머리, 정상 몸통, 단형 또는 중간형 길이 MJ 나사, 금속재, 도금 또는 비도금 볼트, 강도 분류 1100MPa 이하 -치수
航空航天 - 螺栓标准六角头标准柄短或中等长度MJ螺纹金属材料涂层或无涂层强度等级小于或等于1100MPa - 尺寸

1998-12-19

现行

KS W 0931(2023 Confirm)

항공 우주 - 정육각머리, 정상 몸통, 단형 또는 중간형 길이 MJ 나사, 금속재, 도금 또는 비도금 볼트, 강도 분류 1100MPa 이하 -치수
航空航天.强度等级小于或等于1100MPa的涂覆或未涂覆金属材料短或中等长度MJ螺纹普通六角头螺栓.尺寸

1998-12-19

现行

BS ISO 3193-2008

Aerospace. Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天螺栓标准六角头标准柄短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

2008-09-30

现行

ISO 3193-2008

Aerospace — Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺栓标准六角头标准柄短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

2008-08-18

现行

KS W ISO 9256(2020 Confirm)

항공 우주－강도 등급 1 100 MPa 이하, 금속재, 일반 또는 유효 지름 섕크, 긴 길이 MJ 나사, 큰 6각 머리 볼트－치수
航空航天－强度等级小于或等于1100兆帕的有涂层或无涂层金属材料长MJ螺纹标准或中径柄大六角头螺栓－尺寸

2005-12-22

现行

ISO 9256-1993

Aerospace — Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；大六角头螺栓标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

1993-12-23

现行

BS 05/30128677 DC

ISO 3193. Aerospace. Bolts, normal hexagonal head, normal shank, short or medium-length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
ISO 3193 航空航天螺栓标准六角头标准柄短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

2005-02-02

现行

BS +A 309-1994

Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
大六角头螺栓标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

1994-08-15

现行

BS ISO 3186-2008

Aerospace. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa. Dimensions
航空航天有涂层或无涂层的金属材料短或中等长度MJ螺纹标准柄大双六角头螺栓强度等级1250 MPa至1800 MPa 尺寸

2008-09-30

现行

BS ISO 9255-2008

Aerospace. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天螺栓标准花键头标准柄短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

2008-09-30

现行

KS W ISO 9255(2020 Confirm)

항공 우주－강도 등급 1 100 MPa 이하, 금속재, 일반 섕크, 짧은 길이 또는 중간 길이 MJ 나사, 일반 스플라인 머리 볼트－치수
航空航天－强度等级小于或等于1100兆帕的有涂层或无涂层的金属材料短或中长MJ螺纹标准花键头标准柄螺栓－尺寸

2005-12-22

现行

ISO 3186-2008

Aerospace — Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa — Dimensions
航空和航天；有涂层或无涂层的金属材料短或中长MJ螺纹标准柄大双六角头螺栓强度等级为1 250 MPa至1 800 MPa——尺寸

2008-08-18

现行

ISO 3185-2021

Aerospace — Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空航天 - 螺栓普通双六角头正常柄短或中等长度MJ螺纹金属材料涂层或未涂层强度等级小于或等于1 100 MPa - 尺寸

2021-03-30

现行

BS ISO 3185-2021

Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
航空航天螺栓标准双六角头标准柄短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

2021-04-01

现行

ISO 9254-1993

Aerospace — Bolt, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺栓标准花键头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

1993-12-23

现行

KS W ISO 9254(2020 Confirm)

항공 우주－강도 등급 1 100 MPa 이하, 금속재, 코팅한 또는 코팅하지 않은, 일반 또는 유효 지름 섕크, 긴 길이 MJ 나사, 일반 스플라인 머리 볼트－치수
航空航天－强度等级小于或等于1100兆帕的金属材料有涂层或无涂层长MJ螺纹标准花键头标准或中径柄螺栓－尺寸

2005-12-22

现行

ISO 3203-1993

Aerospace — Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺栓标准双六角头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

1993-12-23

现行

ISO 12258-1998

Aerospace — Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 275 MPa — Dimensions
航空和航天；有涂层或无涂层的金属材料长MJ螺纹、标准或中径杆、缩径双六角头螺栓强度等级小于或等于1 275 MPa——尺寸

1998-07-09

现行

BS 05/30128689 DC

ISO 3186. Aerospace. Bolts, large bihexagonal head, normal shank, short or medium-length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa. Dimensions
ISO 3186 航空航天螺栓大双六角头标准杆短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级1 250 MPa至1 800 MPa 尺寸

2005-02-02

现行

BS 05/30128695 DC

ISO 9255. Aerospace. Bolts, normal spline head, normal shank, short or medium-length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
ISO 9255 航空航天螺栓标准花键头标准柄短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

2005-02-02