本欧洲标准规定了3.1中定义的平板产品热轧机的一般安全要求。 本欧洲标准涉及与平板产品的热轧机有关的重大危险，危险情况和事件。它不仅涉及机器按预期使用的情况，还包括制造商预见的其他条件，如可预见的故障，故障或误用（见第4和5条）。 本欧洲标准适用于从（1），通过轧机机架（2）到出口（5）（见图1）的材料供应中用于制造金属热轧扁平产品的机械和设备。 以下设备超出本标准的范围: - 符合EN 746-1，EN 746-2和EN 746-3的炉; - 根据EN 14753的连铸机; - 根据EN 619的钩式输送机; - 卷厂设备; - 存储设备（例如，高架仓库）; - 起重机，叉车，卡车和铁路卡车等车辆。 该欧洲标准不适用于在CEN发布本标准之前制造的平板产品的热轧机

This European Standard defines the general safety requirements for hot rolling mills for flat products as defined in 3.1. This European Standard deals with significant hazards, hazardous situations and events relevant to hot rolling mills for flat products. It deals not only with circumstances where the machinery is used as intended, but also includes other conditions foreseen by the manufacturer, such as foreseeable faults, malfunctions or misuse (see Clauses 4 and 5). This European standard applies to: Machinery and equipment used for the manufacturing of metal hot rolled flat products from the material supply from (1), via the mill stands (2), to the exit (5) (see Figure 1). The following equipment is outside the scope of this standard: - furnaces in accordance with EN 746-1, EN 746-2 and EN 746-3; - continuous casting machines according to EN 14753; - hook conveyors according to EN 619; - roll shop equipment; - storage equipment (e. g., high-bay warehouses); - cranes, fork lifts, trucks and railway trucks and other vehicles. This European standard is not applicable to hot rolling mills for flat products, manufactured before the date of publication of this standard by CEN.