SAE AMS3217A-标准弹性体试验板-国家数字标准馆

现行 SAE AMS3217A

到馆提醒

收藏跟踪

购买正版

Standard Elastomer Stocks Test Slabs 标准弹性体试验板

发布日期： 2016-11-16

本规范及其补充详细规范涵盖了0.075 X 6 X 6英寸（1.90 X 152 X 152 mm）模制试板形式的各种弹性体标准化合物。这些板通常用于确定弹性体类型与各种润滑油、液压油和燃料的相容性，但使用不限于此类应用。

This specification and its supplementary detail specifications cover various elastomer standard compounds in the form of molded test slabs 0.075 X 6 X 6 inches (1.90 X 152 X 152 mm). These slabs are used typically to determine compatibility of the type of elastomer with various lubricating oils, hydraulic fluids, and fuels but usage is not limited to such applications.

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

Evaluation of Gas Turbine Engine Lubricant Compatibility with Elastomer Slabs - Long Duration Test
燃气轮机发动机润滑剂与弹性体板相容性的评估-长期试验

AASHTO T 376M/T 376-17(2021)

Standard Method of Test for Macrocell Slab Chloride Threshold
宏电池板氯化物阈值的标准试验方法

Standard Practice for Preparation of Rock Slabs for Durability Testing
耐久性试验用岩石板制备的标准实施规程

Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
用冲击法测定塑料和弹性体脆性温度的标准试验方法

Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
润滑脂和润滑液弹性体相容性的标准试验方法

润滑脂和液体润滑剂与橡胶相容性测定法
Standard test method for elastomer compatibility of lubricating greases and fluids

ASTM D412-16(2021)

Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
硫化橡胶和热塑性弹性体拉伸的标准试验方法

JIS E 4041-2009

Rolling stock -- Testing of rolling stock on completion of construction and before entry into service (Foreign Standard)
铁路车辆竣工和投入使用前的铁路车辆试验（外国标准）

ASTM D624-00(2020)

Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
常规硫化橡胶和热塑性弹性体撕裂强度的标准试验方法

Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
用原位探头测定混凝土楼板相对湿度的标准试验方法

Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
柔性多孔材料的标准试验方法&x2014；平板、粘合和模制聚氨酯泡沫

Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
测定汽车发动机油与典型密封弹性体相容性的标准试验方法

Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
测定汽车齿轮油与典型油封弹性体相容性的标准试验方法

ASTM D6048-07(2023)

Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers
生橡胶、未硫化橡胶化合物和热塑性弹性体的应力松弛试验的标准实施规程

Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
固体玻璃纤维增强拉挤坯料染色渗透的标准试验方法

ASTM D8015-15(2019)

Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments
弹性体和橡胶材料暴露于气态烃环境的尺寸变化的标准测试方法

Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
工业液压流体用弹性密封件兼容性测定的标准试验方法和建议限值

ASTM E154/E154M-08a(2019)

Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
在混凝土板下、墙壁上或作为地面覆盖物与地面接触的水蒸气缓凝剂的标准试验方法

ASTM D6147-97(2020)

Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
硫化橡胶和热塑性弹性体的标准试验方法&x2014；压缩过程中力衰减（应力松弛）的测定

ASTM D5375/D5375M-98(2019)

Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
压敏标签纸高速脱模的标准试验方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统