首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 EN 14570:2014
到馆阅读
收藏跟踪
购买正版
LPG equipment and accessories - Equipping of overground and underground LPG vessels 石油气设备及配件 - 设置地下及地下液化石油气船只
发布日期: 2014-04-02
实施日期: 2014-04-02
本欧洲标准规定了对地面和地下液化石油气压力容器的装备要求,体积不得大于13立方米,符合EN 12542或同等水平,并进行了液压试验。 本欧洲标准所涵盖的设备直接安装在压力容器连接上。 本欧洲标准不包括仓库储存容器和冷藏库的装备
This European Standard specifies requirements for the equipping of LPG pressure vessels, overground and underground, with a volume not greater than 13 m3 manufactured in accordance with EN 12542 or equivalent and have been hydraulically tested. The equipment covered by this European Standard is directly mounted onto the pressure vessel connections. This European Standard excludes the equipping of depot storage vessels and refrigerated storage vessels.
分类信息
关联关系
研制信息
归口单位: CEN/TC 286-
相似标准/计划/法规
现行
BS EN 14570-2014
LPG equipment and accessories. Equipping of overground and underground LPG vessels
液化石油气设备和配件 配备地上和地下液化石油气容器
2014-04-30
现行
EN 13109-2010
LPG equipment and accessories - LPG tanks and drums - Disposal
液化石油气设备及配件 - 液化石油气罐及桶 - 处置
2010-12-22
现行
GOST EN 12252-2017
Оборудование и устройства для сжиженного нефтяного газа. Оборудование автоцистерн для перевозки сжиженного нефтяного газа
液化石油气设备及配件 装备液化石油气公路油罐车
2017-11-30
现行
EN 12816-2010
LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal
石油气设备及配件 - 可运输的可充填液化石油气瓶 - 处置
2010-12-22
现行
BS EN 12817-2019
LPG Equipment and accessories. Inspection and requalification of LPG pressure vessels up to and including 13 m3
液化石油气设备和配件 13米及以下液化石油气压力容器的检查和再鉴定
2019-03-19
现行
EN 1442-2017
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
液化石油气设备及配件 - 用于液化石油气的可运输的可再填充焊接钢瓶 - 设计和施工
2017-05-10
现行
EN 12817-2019
LPG Equipment and accessories - Inspection and requalification of LPG pressure vessels up to and including 13 m³
液化石油气设备及配件 - 液化石油气压力容器的检验和重新认证 最高可达13m³
2019-03-13
现行
EN 14140-2014/AC-2015
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
液化石油气设备及配件 - 用于液化石油气的可运输的可再填充焊接钢瓶 - 替代设计和施工
2015-05-13
现行
EN 14140-2014
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
液化石油气设备及配件 - 用于液化石油气的可运输的可再填充焊接钢瓶 - 替代设计和施工
2014-12-03
现行
EN 12807-2019
LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
石油气设备及配件 - 液化石油气(LPG)可运输的可再填充钎焊钢瓶 - 设计和施工
2019-07-10
现行
EN 14678-3-2013
LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
石油气设备及配件 - 汽车加油站液化石油气设备的建造及表现 - 第3部:商业及工业处所的加油设施
2013-01-09
现行
BS 07/30172584 DC
BS EN 12817. LPG Equipment and accessories. Inspection and requalification of LPG tanks up to and including 13 m3
英国标准EN 12817 液化石油气设备和配件 13 m3及以下液化石油气储罐的检查和再鉴定
2007-12-04
现行
EN 14129-2014
LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
LPG设备及配件 - 液化石油气压力容器的泄压阀
2014-02-19
现行
EN 13175-2019+A1-2020
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
LPG设备及附件 - 液化石油气(LPG)压力容器阀门和配件的规格和测试
2020-06-03
现行
EN 12542-2020
LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
液化石油气设备及配件 - 静电焊接圆柱形水箱 用于储存体积不大于13立方米的液化石油气(LPG)连续生产 - 设计和制造
2020-08-19
现行
EN 14678-1-2013
LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
LPG设备及配件 - 汽车加油站液化石油气设备的建造和性能 - 第1部分:分配器
2013-03-20
现行
EN 12819-2019
LPG equipment and accessories - Inspection and requalification of LPG pressure vessels greater than 13 m³
“LPG设备及配件 - 大于13立方米的液化石油气压力容器的检验和重新鉴定
2019-03-13
现行
EN 14893-2014
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
LPG设备及配件 - 容量介于150升至1000升之间的可运输液化石油气(LPG)焊接钢压力鼓
2014-05-21
现行
EN 14678-2-2007+A1-2012
LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements
LPG设备及配件 - 汽车加油站液化石油气设备的建造和性能 - 第2部分:除了分配器和安装要求之外的组件
2012-02-08