1.1 为了有效解释和保存评估结果，必须以通用、开放的格式显示、传输和存储数字无损评估数据。ASTM国际在普遍存在的医疗行业标准《医学数字成像与通信》（DICOM）的基础上，制定了无损评估数字成像与通信（DICONDE）的通用开放标准。本指南概述了解决DICONDE的ASTM国际标准实践，并帮助确定不同用例的正确标准实践。 1.2 本文件概述了如何利用第段中的ASTM DICONDE标准实践 2.1.2 ASTM DICONDE试验方法数字无损检测数据的显示、传输和存储标准 1.3 本文件概述了如何在其他文件上使用第2.2段中的DICOM标准，以显示、传输和存储数字无损检测数据，用于DICONDE标准实践中未明确提及但具有等效医学成像模式的测试方法。 1.4 本文件提供了未涉及的无损数字测试数据的显示、传输和存储建议 1.2 或 1.3 . 1.5 本文件概述了如何利用第段中的ASTM DICONDE标准实践 2.1.3 关于ASTM DICONDE互操作性标准，用于验证遵循ASTM DICONDE标准的数字无损检测数据的显示、传输和存储系统。 1.6 本文件概述了如何利用ASTM DICONDE标准实践 2.1.3 用于验证两个或多个遵循ASTM DICONDE标准传输数字无损检测数据的系统是否可以成功传输数据。 1.7 本文件概述了如何利用ASTM DICONDE标准实践 2.1.3 用于验证符合ASTM DICONDE标准的两个或多个数字无损检测数据显示系统是否一致。 1.8 尽管本指南不包含需要单位的值，但它确实描述了需要正确解释单位的数据存储和通信方法。本指南要求的国际单位应视为标准单位。本指南中不包括其他测量单位。 1.9 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.10 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 负责数字无损评估结果的创建、显示、传输或存储的人员将使用本指南。 5.2 负责设计和制造符合DICONDE标准的无损检测系统的人员将使用本指南。 5.3 负责购买和实施符合DICONDE标准的无损检测系统的人员将使用本指南。 5.4 本指南将为中描述的用例推荐使用DICONDE标准的行动方案 5.1 , 5.2 和 5.3 .

1.1 The display, transfer and storage of digital nondestructive evaluation data in a common, open format is necessary for the effective interpretation and preservation of evaluation results. ASTM International has developed common open standards for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) based on the ubiquitous healthcare industry standard Digital Imaging and Communication in Medicine (DICOM). This guide provides an overview of the ASTM International standard practices that address DICONDE and assistance in identifying the correct standard practices for different use cases. 1.2 This document provides an overview of how to utilize the ASTM DICONDE standard practices found in paragraph 2.1.2 on ASTM DICONDE Test Methods Standards for the display, transfer and storage of digital nondestructive test data 1.3 This document provides an overview of how to utilize the DICOM standard found in paragraph 2.2 on Other Documents for the display, transfer and storage of digital nondestructive test data for test methods not explicitly addressed by a DICONDE standard practice but having an equivalent medical imaging modality. 1.4 This document provides recommendations for the display, transfer and storage of nondestructive digital test data not addressed in 1.2 or 1.3 . 1.5 This document provides an overview of how to utilize the ASTM DICONDE standard practices found in paragraph 2.1.3 on ASTM DICONDE Interoperability Standards for validating a system that follows the ASTM DICONDE standard for the display, transfer and storage of digital nondestructive test data. 1.6 This document provides an overview of how to utilize the ASTM DICONDE standard practices found in 2.1.3 for validating that two or more systems that follow the ASTM DICONDE standard for the transfer of digital nondestructive test data can successfully transfer data. 1.7 This document provides an overview of how to utilize the ASTM DICONDE standard practices found in 2.1.3 for validating that two or more systems that follow the ASTM DICONDE standard for the display of digital nondestructive test data display data consistently. 1.8 Although this guide contains no values that require units, it does describe methods to store and communicate data that do require units to be properly interpreted. The SI units required by this guide are to be regarded as standard. No other units of measurement are included in this guide. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 Personnel responsible for the creation, display, transfer or storage of digital nondestructive evaluation results will use this guide. 5.2 Personnel responsible for the design and manufacture of NDT systems conforming to the DICONDE standard will use this guide. 5.3 Personnel responsible for the purchase and implementation of NDT systems conforming to the DICONDE standard will use this guide. 5.4 This guide will recommend courses of action for utilizing the DICONDE standard for the use cases described in 5.1 , 5.2 , and 5.3 .