现行

VDI 2225 Sheet 4

Design engineering methodics - Engineering design at optimum cost - Dimensioning
设计工程方法学.以最佳成本进行工程设计.尺寸标注

1997-11-01

现行

DIN 58764

Production in optical engineering - Connecting dimensions for means of transport and handling systems
光学工程生产.运输工具和装卸系统的连接尺寸

2001-07-01

现行

ISO/IEC/IEEE 24641-2023

Systems and Software engineering — Methods and tools for model-based systems and software engineering
系统和软件工程.基于模型的系统和软件工程学的方法和工具

2023-05-16

现行

ISO/IEC 26551-2016

Software and systems engineering — Tools and methods for product line requirements engineering
软件和系统工程 - 产品线要求工程的工具和方法

2016-04-27

现行

BS ISO/IEC 26551-2016

Software and systems engineering. Tools and methods for product line requirements engineering
软件和系统工程 产品线需求工程的工具和方法

2016-05-31

现行

ASTM F3030-13(2024)

Standard Test Method for Snowboards with a Channel-Mounting System and Removable Inserts
带通道安装系统和可拆卸插入件的滑雪板的标准试验方法

2024-07-01

现行

BS DD ISO/TS 23556-2007

Performance test method for diesel engine soot-removal devices in lubricating oils. Initial filtration efficiency
润滑油中柴油发动机除灰装置的性能试验方法 初始过滤效率

2007-05-31

现行

JB/T 11791-2014

柴油机润滑油中碳黑去除装置的性能试验方法　初始滤清效率
Performance test method for diesel engine soot-removal devices in lubricating oils - Initial filtration efficiency

2014-05-12

现行

TechAmerica EIA-731-2

Systems Engineering Capability Model Appraisal Method
系统工程能力模型评估方法

2002-08-01

现行

GOST 28827-1990

Системы зажигания автомобильных двигателей. Методы испытаний
汽车发动机点火系统测试方法

现行

GB/T 39788-2021

系统与软件工程 性能测试方法
System and software engineering—Performance testing method

2021-03-09

现行

ISO/IEC 26580-2021

Software and systems engineering — Methods and tools for the feature-based approach to software and systems product line engineering
软件和系统工程.基于特征的软件和系统产品线工程方法和工具

2021-04-21

现行

BS ISO/IEC 26580-2021

Software and systems engineering. Methods and tools for the feature-based approach to software and systems product line engineering
软件和系统工程 基于特征的软件和系统产品线工程方法和工具

2021-05-05

现行

KS R ISO 9817(2020 Confirm)

승용차－기관 냉각 시스템－압력 캡과 필러 넥에서의램프 시트 치수
乘用车－发动机冷却系统－加注口颈上的压力盖及其斜面座的尺寸

2015-11-26

现行

ISO 9817-1991

Passenger cars — Engine cooling systems — Dimensions of pressure caps and their ramp seats on filler necks
乘用车——发动机冷却系统——加注口颈上的压力盖及其斜面座的尺寸

1991-12-05

现行

GOST R 57195-2016

Ядро и язык для методов системной и программной инженерии. Общие положения
内核和语言的系统和软件工程方法 一般

现行

GB/T 38639-2020

系统与软件工程 软件组合测试方法
Systems and software engineering—Software combinatorial testing method

2020-04-28

现行

ITU-T E.733

Methods for dimensioning resources in Signalling System No. 7 networks
7号信令系统网络中资源尺寸的确定方法

1998-11-13

现行

SAE J2762_201703

Method for Removal of Refrigerant from Mobile Air Conditioning System to Quantify Charge Amount
从移动空调系统中去除制冷剂以量化加注量的方法

2017-03-10

现行

ASHRAE 198-2013

Standard 198-2013 -- Method of Test for Rating DX-Dedicated Outdoor Air Systems for Moisture Removal Capacity and Removal Efficiency (ANSI Approved)
标准198-2013——DX专用室外空气系统除湿能力和除湿效率评级的试验方法（ANSI批准）