本文件规定了紫外线激光打印护套、镀银铜导体、， 用于on的交联乙烯-四氟乙烯共聚物XLETFE系列电缆 在-65°C至150°C的工作温度下，在不超过600 V的电压下运行的飞机机载电气系统。该绝缘系统已在航空航天应用中使用，使用115 V（相对中性）400 Hz ac和28 Vdc。用户应负责验证电缆是否适用于其他电气系统。 这些电缆适合机身使用，无需额外保护。如果两者之间存在冲突 标准和其他参考文件应以本标准的要求为准。交叉引用:EN 2235EN 4611-006EN 4612-002EN 9133EN 3475- 100购买本文件时可获得的所有当前修订均包含在购买本文件中。

This document specifies the characteristics of UV laser printable jacket, silver plated copper conductor, electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer XLETFE family for use in the on board electrical systems of aircraft at operating temperatures between - 65 °C and 150 °C, operating at voltages not exceeding 600 V. This insulation system has been used in aerospace applications using 115 V (phase-to-neutral) 400 Hz ac and 28 Vdc. Verification of the suitability of cables for use in other electrical systems is the responsibility of the user. These cables are suitable for airframe use without additional protection. In case of conflict between this standard and other referenced documents the requirements of this standard shall take precedence.Cross References:EN 2235EN 4611-006EN 4612-002EN 9133EN 3475-100All current amendments available at time of purchase are included with the purchase of this document.