ISO 9386的本部分规定了永久性安装设备的安全规则、尺寸和功能操作 供站立或坐下时行动不便的人使用的电动垂直升降平台 坐在轮椅上，不管有没有服务员。 它规定了起重平台的要求 a） 安装在封闭的升降通道内，以及 b） 其设计或位置允许其在没有封闭升降通道的情况下使用。 仅限于以下起重平台: a） 在固定高度之间移动的； b） 没有升降通道外壳和地板贯穿件的: 1） 行程可达2.0米， 2） 在行程高达4.0米的私人住宅中； c） 带有升降通道外壳且行程高达4.0m的； d） 额定速度不超过0.15 m/s的； e） 行程线与垂直面和垂直面之间的夹角不超过15°； f） 额定载荷不小于250 kg的。 ISO 9386的这一部分并未规定电气设备所有方面的所有一般技术要求， 机械或建筑施工。 ISO 9386的本部分尽可能只规定了材料和设备需要满足的要求 为了安全和功能运行。 还包括防止设备受到有害影响的要求 安装在外部位置。

This part of ISO 9386 specifies the safety rules, dimensions and functional operation for permanently installed power-operated vertical lifting platforms intended for use by persons with impaired mobility when standing or sitting in a wheelchair, with or without an attendant. It specifies requirements for lifting platforms a) installed within enclosed liftways, and b) whose design or location permits their use without an enclosed liftway. It is restricted to the following lifting platforms: a) those which travel between fixed levels; b) those without liftway enclosure and without floor penetration: 1) with travel up to 2,0 m, 2) in private dwellings with travel up to 4,0 m; c) those with liftway enclosure with travel up to 4,0 m; d) those whose rated speed does not exceed 0,15 m/s; e) those whose line of travel does not exceed 15° from the vertical and; f) those whose rated load is not less than 250 kg. This part of ISO 9386 does not specify every general technical requirement for all aspects of the electrical, mechanical or building construction. As far as possible, this part of ISO 9386 specifies only the requirements that materials and equipment need to meet in the interests of safety and functional operation. Requirements are also included for protection against harmful influences which may be experienced by equipment installed in external locations.