1.1 本规程为涂层涂敷器提供了一种标准的鉴定方法，以验证其熟练程度和能力，从而达到在钢表面涂敷指定涂层所需的质量，包括在核设施安全相关区域的涂层。 1.2 本文所述实践的变化或简化可能适用于特殊涂层工作，如设备供应商车间人员的维护或资格认证。这种做法的目的并不是要求所有资格都有一个单一的基础。 1.3 根据本规范，应由符合本规范规定的合格代理人对涂层涂敷器进行评估 4.1 .应按照第节的规定编制报告 5. ，以及第节中规定的认证 6. . 1.4 本规程的目的是仅判断涂层涂敷器使用适当工具和设备涂敷特定涂层的能力。 1.5 以英寸磅为单位的数值应视为标准。括号中给出的值仅供参考。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This practice provides a standard qualifying method for coating applicators to verify their proficiency and ability to attain the required quality for application of specified coatings to steel surfaces including those in safety-related areas in a nuclear facility. 1.2 Variations or simplifications of the practice set forth herein may be appropriate for special coating work such as maintenance or qualifications of equipment suppliers shop personnel. It is not the intent of this practice to mandate a singular basis for all qualifications. 1.3 Evaluation of the coating applicator being qualified in accordance with this practice, shall be by qualified agents as specified in 4.1 . Reports shall be prepared as specified in Section 5 , and certification as specified in Section 6 . 1.4 It is the intent of this practice to judge only the ability of the coating applicator to apply specified coatings with the proper tools and equipment. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.