DIN 103-5-ISO公制梯形螺纹；标称直径为8至100 mm的螺母螺纹的极限尺寸-国家数字标准馆

现行 DIN 103-5

到馆提醒

收藏跟踪

购买正版

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter ISO公制梯形螺纹；标称直径为8至100 mm的螺母螺纹的极限尺寸

发布日期： 1972-10-01

极限尺寸根据DIN 103-4的标称螺纹尺寸和DIN 103-3的公差和公差计算得出。

The limiting sizes have been calculated from the nominal screw thread dimensions according to DIN 103-4 & from the allowances & tolerances according to DIN 103-3.

分类信息

发布单位或类别：德国-德国标准化学会

关联关系

研制信息

相似标准/计划/法规

GB/T 12359-2008

梯形螺纹极限尺寸
Metric trapezoidal screw threads - Limits of sizes

KS B 0219(2023 Confirm)

미터 사다리꼴 나사 허용 한계 치수 및 공차
米制梯形螺纹尺寸公差限值

KS B 0219(2018 Confirm)

미터 사다리꼴 나사 허용 한계 치수 및 공차
尺寸公差米制梯形螺纹LIMIT

JIS B 0218-1980

Limit of sizes and tolerances for metric trapezoidal screw threads
米制梯形螺纹的尺寸和公差限值

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
ISO公制梯形螺纹；标称直径为105至300 mm的螺母螺纹的极限尺寸

JIS B 0217-2-2013

ISO metric trapezoidal screw threads -- Tolerances -- Part 2: Limits of sizes for external and internal screw thread
ISO公制梯形螺纹公差第2部分:外螺纹和内螺纹尺寸限值

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
ISO公制梯形螺纹；标称直径为8至100 mm的螺栓螺纹的极限尺寸

ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
ISO公制梯形螺纹；公称直径为105至300 mm的螺栓螺纹的极限尺寸

ISO metric screw threads-Specification for selected limits of size
ISO公制螺纹

ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts.
ISO通用公制螺纹螺钉、螺栓和螺母的选定尺寸

ISO general purpose metric screw threads — Selected sizes for bolts, screws, studs and nuts
ISO通用公制螺纹-螺栓、螺钉、螺柱和螺母的选定尺寸

ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
ISO通用公制螺纹螺钉、螺栓和螺母的选定尺寸（ISO 262-1998）

JIS B 0205-3-2001

ISO general purpose metric screw threads -- Part 3: Selected sizes for screws, bolts and nuts
ISO通用公制螺纹第3部分:螺钉、螺栓和螺母的选择尺寸

BS ISO 965-2-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for general purpose external and internal screw threads. Medium quality
ISO通用公制螺纹公差

ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality.
ISO通用公制螺纹公差通用外螺纹和内螺纹的尺寸限制中等质量

BS ISO 965-5-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹公差

JIS B 0209-2-2001

ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
ISO通用公制螺纹公差第2部分:通用外螺纹和内螺纹尺寸限值中等质量

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹——公差SPART 5:与热浸镀锌外螺纹配合的内螺纹尺寸限制镀锌前最大公差位置为h

JIS B 0209-5-2001

ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用米制螺纹公差第5部分:镀锌前最大公差位置为h的热浸镀锌外螺纹与内螺纹配合的尺寸限制

GOST ISO 965-5-2015

Основные нормы взаимозаменяемости. Резьбы метрические ИСО общего назначения. Допуски. Предельные размеры внутренних резьб, сопрягаемых с горячеоцинкованными наружными резьбами, соответствующими до нанесения покрытия полям допусков с основными отклонениями до h включительно
互换性的基本规范 ISO通用公制螺纹公差内螺纹尺寸的限制与热镀锌外螺纹配合镀锌前最大公差位置h

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统