现行

ASTM F2970-22

Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
蹦床场地的设计、制造、安装、操作、维护、检查和主要改造的标准实施规程

2022-06-01

现行

ASTM E2174-20a

Standard Practice for On-Site Inspection of Installed Firestop Systems
安装的防火系统的现场检验的标准实施规程

2020-04-15

现行

ASTM F708-24

Standard Practice for Design and Installation of Rigid Pipe Hangers
刚性管道吊架的设计和安装的标准实施规程

2024-01-01

现行

ASTM D5092/D5092M-16(2024)

Standard Practice for Design and Installation of Groundwater Monitoring Wells
地下水监测井的设计和安装标准实施规程

2024-06-15

现行

BS 7883-2019

Personal fall protection equipment. Anchor systems. System design, installation and inspection. Code of practice
个人坠落防护设备 锚定系统 系统设计、安装和检查 业务守则

2019-11-29

现行

ASTM C1060-23

Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
框架建筑外壳空腔中绝缘装置的热图检查的标准实施规程

2023-03-01

现行

ULC 590

Standard for Design, Installation, Inspection, Testing and Maintenance of Safety Way Guidance System
安全通道导向系统的设计、安装、检查、测试和维护标准

现行

ASTM E1643-24

Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
混凝土板下与泥土或颗粒填料接触的水蒸气缓凝剂的选择、设计、安装和检验的标准实施规程

2024-06-01

现行

ASTM E2393-20a

Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
现场检查安装的防火接头系统和周边防火墙的标准做法

2020-10-01

现行

ASCE 15-17

Standard Practice for Direct Design of Buried Precast Concrete Pipe Using Standard Installations (SIDD)
使用标准装置（SIDD）直接设计埋地预制混凝土管的标准实施规程

2017-06-08

现行

ASTM F2783-20

Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada
加拿大游乐设施和装置的设计、制造、操作、维护和检验的标准实施规程

2020-04-01

现行

ASTM C1840/C1840M-24a

Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
已安装钢筋混凝土涵洞、雨水管和雨水管的检查和验收标准规程

2024-09-01

现行

ASTM E557-12(2020)

Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
建筑设计和安装的标准指南 用于通过可操作分隔分隔的空间之间的隔音

2020-04-01

现行

ASTM D3740-23

Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
工程设计和施工中土壤和岩石试验和/或检验机构最低要求的标准实施规程

2023-11-01

现行

NACE SP0294-2006

Standard Practice - Design, Fabrication, and Inspection of Storage Tank Systems for Concentrated Fresh and Process Sulfuric Acid and Oleum at Ambient Temperatures
标准实施规程.环境温度下浓缩新鲜和工艺硫酸和发烟硫酸储罐系统的设计、制造和检验

2006-12-01

现行

ASCE 3-91/9-91

Standard for the Structural Design of Composite Slabs (ANSI/ASCE 3-91) and Standard Practice for Construction and Inspection of Composite Slabs (ANSI /ASCE 9-91)
复合板结构设计标准（ANSI/ASCE 3-91）和复合板施工和检验标准规程（ANSI/ASCE 9-91）

现行

ASTM F2375-09(2017)

Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
游乐设备 游乐场所和景点使用的攀岩网和网/网的设计 制造 安装和测试标准实践

2017-05-01

现行

MIL MIL-STD-1678-1D Change 1

DEPARTMENT OF DEFENSE STANDARD PRACTICE FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 5 PARTS) (SUPERSEDING MIL-STD-1678-1C)
国防部标准实施规程光纤布线系统要求和测量（第1部分:设计、安装和维护要求）（共5部分中的第1部分）（取代MIL-STD-1678-1C）

2017-01-17

现行

MIL MIL-STD-1678-1D

DEPARTMENT OF DEFENSE STANDARD PRACTICE FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 5 PARTS) (SUPERSEDING MIL-STD-1678-1C)
国防部标准规程光纤布线系统要求和测量（第1部分:设计、安装和维护要求）（第1部分 共5部分）（取代MIL-STD-1678-1C）

2016-10-03

现行

MIL MIL-STD-1678-1D w/Change 2

DEPARTMENT OF DEFENSE STANDARD PRACTICE FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 5 PARTS) (SUPERSEDING MIL-STD-1678-1C)
国防部标准实施规程光纤布线系统要求和测量（第1部分:设计、安装和维护要求）（共5部分中的第1部分）（取代MIL-STD-1678-1C）

2019-11-13