首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS EN ISO 10619-1:2018
到馆提醒
收藏跟踪
购买正版
Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness-Bending tests at ambient temperature 橡胶和塑料软管和管子 柔度和刚度的测量
发布日期: 2018-03-09
BS EN ISO 10619-1:2018规定了三种测量橡胶和塑料软管及软管柔性的方法 管道(方法A1、B和C1),其中测量软管或管道的变形,以及 通过测量弯曲所需的力来测量刚度的方法(方法A2和C2) 环境温度下特定半径的橡胶或塑料软管或管道。交叉引用:ISO 4671ISO 8330ISO 23529购买本文件时提供的所有现行修订均包含在购买本文件中。
BS EN ISO 10619-1:2018 specifies three methods for measuring the flexibility of rubber and plastics hoses and tubing (methods A1, B and C1), where the deformation of the hose or tubing is measured, and two methods for measuring the stiffness (methods A2 and C2) by measuring the force required to bend rubber or plastics hoses or tubing to a specific radius at ambient temperature.Cross References:ISO 4671ISO 8330ISO 23529All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS EN ISO 10619-2-2021
Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness-Bending tests at sub-ambient temperatures
橡胶和塑料软管和管子 柔度和刚度的测量
2021-08-27
现行
BS ISO 10619-3-2011
Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness-Bending tests at high and low temperatures
橡胶和塑料软管和管子 柔度和刚度的测量
2011-12-31
现行
KS M ISO 10619-1
고무 및 플라스틱 호스와 튜브 —유연성과 강성 측정 —제1부: 상온 굽힘 시험
橡胶和塑料软管和管材 - 挠性和刚度的测量 - 第1部分:环境温度下的弯曲试验
2019-12-30
现行
GOST ISO 10619-1-2016
Рукава и трубки резиновые и пластиковые. Измерение гибкости и жесткости. Часть 1. Испытание на изгиб при температуре окружающей среды
橡胶和塑料软管和管道 测量柔韧性和刚度 第1部分环境温度下的弯曲试验
2016-03-29
现行
GB/T 5565.1-2017
橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分:室温弯曲试验
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures
2017-09-07
现行
ISO 10619-1-2017
Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature
橡胶和塑料软管和管材 - 挠性和刚度的测量 - 第1部分:环境温度下的弯曲试验
2017-12-15
现行
KS M ISO 10619-2
고무 및 플라스틱 호스와 튜브 —유연성과 강성 측정 —제2부: 저온 굽힘 시험
橡胶和塑料软管和管道 - 灵活性和刚度的测量 - 第2部分:亚环境温度下的弯曲试验
2019-12-30
现行
KS M ISO 10619-3(2019 Confirm)
고무 및 플라스틱 호스와 튜브 — 유연성과 강성 측정 — 제3부: 고온과 저온에서 굽힘 시험
橡胶和塑料软管和管材 - 柔韧性和刚度的测量 - 第3部分:高温和低温弯曲试验
2014-09-02
现行
GOST ISO 10619-2-2020
Рукава и трубки резиновые и пластиковые. Измерение гибкости и жесткости. Часть 2. Испытание на изгиб при низких температурах
橡胶和塑料软管和管子 柔度和刚度的测量 第二部分 亚环境温度下的弯曲试验
现行
GB/T 5565.2-2017
橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分:低于室温弯曲试验
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures
2017-09-07
现行
GB/T 5565.3-2017
橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分:高温和低温弯曲试验
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures
2017-09-07
现行
ISO 10619-2-2021
Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures
橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分:低于室温弯曲试验
2021-06-28
现行
ISO 10619-3-2011
Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
橡胶和塑料软管和管道——柔度和刚度的测量第3部分:高温和低温下的弯曲试验
2011-11-24
现行
DIN EN ISO 10619-3
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
橡胶和塑料软管和管材.柔性和刚度的测量.第3部分:高温和低温下的弯曲试验(ISO 10619-3-2011);德文版EN ISO 10619-3:2011
2012-03-01
现行
DIN EN 1763-DRAFT
Draft Document - Flexible rubber and plastics hose, tubing, coupling tails and assemblies for use with propane and butane in the vapour phase - Specification; German version prEN 1763:2005
起草文件-与丙烷和丁烷在气相中使用的柔性橡胶和塑料软管、管道、连接尾管和组件-规范;德文版prEN 1763:2005
2006-02-01