首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
国家标准 行业标准 地方标准 团体标准 国际（区域）标准 国外国家标准 国际性专业标准 技术法规
国内舆情 国际舆情
文献服务 知识服务 服务站点
标准数字化 技贸措施研究
国家标准馆 国家数字标准馆 发展大事记
现行 BS EN 489-1:2019
到馆阅读
收藏跟踪
购买正版
District heating pipes. Bonded single and twin pipe systems for buried hot water networks-Joint casing assemblies and thermal insulation for hot water networks in accordance with EN 13941-1 区域供暖管道 埋地热水管网用粘结单管和双管系统 符合EN 13941-1要求的热水管网接头外壳组件和隔热层
发布日期： 2019-11-05
本文件规定了相邻工厂制造管道之间接头的要求和试验方法， 和/或符合EN 13941-1的埋地热水管网配件和/或阀门组件。交叉引用:BS EN 253:2019EN 253:2019ISO 16770EN 14419EN 17248EN 12814-1EN 13941-2EN 488DVS 2202-1DVS 2207-4DVS 2207-3EN 13941-1DVS 2207-1EN 15698-2DVS 2207-4-5EN 15698-1EN 448购买本文件时提供的所有当前修改件均包括在内。
This document specifies requirements and test methods for joints between adjacent factory made pipe, and/or fitting and/or valve assemblies for buried hot water networks in accordance with EN 13941-1.Cross References:BS EN 253:2019EN 253:2019ISO 16770EN 14419EN 17248EN 12814-1EN 13941-2EN 488DVS 2202-1DVS 2207-4DVS 2207-3EN 13941-1DVS 2207-1EN 15698-2DVS 2207-4-5EN 15698-1EN 448All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别： 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS EN 14419-2019
District heating pipes. Bonded single and twin pipe systems for buried hot water networks. Surveillance systems
区域供暖管道 埋地热水管网用粘结单管和双管系统 监视系统
2019-10-28
现行
BS EN 13941-1-2019+A1-2021
District heating pipes. Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks-Design
区域供暖管道 直埋热水管网保温粘结单管和双管系统的设计和安装
2022-01-07
现行
BS EN 13941-2-2019+A1-2021
District heating pipes. Design and installation of thermal insulated bonded single and twin pipe systems for directly buried hot water networks-Installation
区域供暖管道 直埋热水管网保温粘结单管和双管系统的设计和安装
2022-01-07
现行
BS EN 15698-1-2019
District heating pipes. Bonded twin pipe systems for directly buried hot water networks-Factory made twin pipe assembly of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
区域供暖管道 直埋热水管网的粘结双管系统 工厂制造的钢管、聚氨酯保温材料和一个聚乙烯套管的双管组件
2019-11-05
现行
UNE-EN 14419-2009
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems
区域供暖管道.直埋热水网络用预绝缘粘结管道系统.监控系统
2009-11-11
现行
UNE-EN 15698-1-2010
District heating pipes - Preinsulated bonded twin pipe systems for directly buried hot water networks - Part 1: Twin pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
区域供暖管道.直埋热水网络用预绝缘粘结双管系统.第1部分:钢制服务管 聚氨酯隔热和聚乙烯外壳的双管组件
2010-04-28
现行
BS EN 253-2019
District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
区域供暖管道 直埋热水管网用粘结单管系统 工厂制造的钢管、聚氨酯保温材料和聚乙烯套管的管道组件
2019-11-04
现行
BS EN 15698-2-2019
District heating pipes. Bonded twin pipe systems for directly buried hot water networks-Factory made fitting and valve assemblies of steel service pipes, polyurethane thermal insulation and one casing of polyethylene
区域供暖管道 直埋热水管网的粘结双管系统 工厂制造的配件和阀门组件 包括钢制供水管、聚氨酯隔热材料和一个聚乙烯外壳
2019-11-05
现行
BS EN 448-2019
District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
区域供暖管道 直埋热水管网用粘结单管系统 工厂制造的钢制供水管道配件、聚氨酯隔热材料和聚乙烯外壳
2019-10-29
现行
BS EN 488-2019
District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made steel valve assembly for steel service pipes, polyurethane thermal insulation and a casing of polyethylene
区域供暖管道 直埋热水管网用粘结单管系统 工厂制造的钢制阀门组件 用于钢制供水管道、聚氨酯隔热材料和聚乙烯外壳
2019-11-04
现行
UNE-EN 253-2010
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
区域供暖管道.直埋热水网络用预绝缘粘结管道系统.钢制服务管、聚氨酯隔热和聚乙烯外壳的管道组件
2010-04-21
现行
BS EN 17415-1-2020
District cooling pipes. Bonded single pipe systems for directly buried cold water networks-Factory made pipe assembly of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
区域冷却管 直埋冷水管网用粘结单管系统
2020-08-04
现行
UNE-EN 448-2010
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
区域供暖管道.直埋热水管网用预绝缘粘结管道系统.钢制供水管、聚氨酯隔热和聚乙烯外壳的配件组件
2010-12-01
现行
UNE-EN 489-2010
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
区域供暖管道.直埋热水管网用预绝缘粘结管道系统.钢制供水管、聚氨酯隔热和聚乙烯外壳的接头组件
2010-10-20
现行
BS EN 15632-3-2022
District heating pipes. Factory made flexible pipe systems-Non bonded system with plastic service pipes; requirements and test methods
区域供暖管道 工厂制造的挠性管系统-带塑料服务管的非粘合系统；要求和试验方法
2022-06-17
现行
UNE-EN 488-2005
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
区域供暖管道.直埋热水管网用预绝缘粘结管道系统.钢制供水管道、聚氨酯隔热和聚乙烯外壳用钢阀组件
2005-01-26
现行
DIN EN 17415-1
District cooling pipes - Bonded single pipe systems for directly buried cold water networks - Part 1: Factory made pipe assembly of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
区域冷却管.直埋冷水管网用粘结单管系统.第1部分:钢或塑料服务管、聚氨酯隔热和聚乙烯套管的工厂制管道组件
2021-11-01
现行
BS EN 17415-2-2021
District cooling pipes. Bonded single pipe systems for directly buried cold water networks-Factory made fitting assemblies of steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
区域冷却管 直埋冷水管网用粘结单管系统
2021-09-07
现行
UNE-EN 15632-4-2010
District heating pipes - Pre-insulated flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods
区域供暖管道.预绝缘软管系统.第4部分:带金属服务管的粘结系统；要求和试验方法
2010-03-17
现行
BS EN 17415-3-2021
District cooling pipes. Bonded single pipe systems for directly buried cold water networks-Factory made steel valve assembly for steel or plastic service pipe, polyurethane thermal insulation and a casing of polyethylene
区域冷却管 直埋冷水管网用粘结单管系统
2021-09-07
  • 关于国家数字标准馆
  • 《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。
    • 文献服务
  • 查标准
  • 看标准
  • 买标准
  • 译标准
    • 知识服务
  • 查新颖性
  • 查有效性
  • 跟踪标准
  • 比对标准
    • 标准数字化
  • 专题数据库
  • 标准管理系统
  • 大数据分析系统
  • 标准智能研制系统
    • 出版物经营许可证：新出发京批字第直170229号
    地址：北京市海淀区知春路4号
    邮箱：service@cnis.ac.cn
    技术支持与订单查询：010-58811972/1360/1341/1328 京ICP备10046988号-46
    ️版权归中国标准化研究院所有