座椅家具安装在座椅周围，旨在提高乘客的隐私和舒适度。它们可能会在飞机飞行时提供额外的乘客座位，但在滑行、起飞和着陆（TTL）期间不会有乘客。本航空航天标准（AS）规定了大型运输类飞机上安装的带或不带上部附件（见图1和图2）的座椅家具的最低设计、性能和资格要求。本标准不包括直接连接至座椅总成的座椅装饰设计，AS8049是适用标准。 与座椅家具相连的集成物品（桌面、橱柜、架子、存放区、壁橱、隔板等）应符合本规范的要求，作为座椅家具的一部分。

Seat furnishings are installed around seats and are intended to enhance passenger privacy and comfort. They may have provisions for additional occupants to be seated when the aircraft is in-flight, but would not be occupied during taxi, take-off, and landing (TTL).This Aerospace Standard (AS) establishes the minimum design, performance and qualification requirements for seat furnishings with and without upper attachments (seeFigures 1and2) to be installed in large transport category airplanes. This standard excludes seat furnishing designs that are directly attached to the seat assembly, for which AS8049 is the applicable standard.Integrated items (desk tops, cabinets, shelves, stowage areas, closeouts, dividers, etc.) connected to seat furnishings shall comply with the requirements of this AS as part of the seat furnishings.