首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
历史 ASTM E2063-05(2011)
到馆提醒
收藏跟踪
购买正版
Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations 校准和功能检查的标准实践用于法医心理生理检测欺骗(测谎)考试
发布日期: 2011-03-01
1.1本规程提供了积极用于欺骗心理生理检测的校准和仪器(模拟和计算机系统)指南( 真实性验证 ). 至少,此类仪器应同时记录个人的呼吸、体外皮电和心血管活动。 1.2模拟测谎仪应由心理生理学欺骗检测(PDD)检查员、制造商或工厂授权的个人进行校准。 1.3计算机化仪表应由制造商或工厂授权人员进行校准。 1.4 PDD检查员或工厂授权人员应进行功能检查,以确保仪器正常工作。 1.5本规程不禁止提供额外组件作为生理变化的补充测量。除了所需的最小组件外,还可以使用其他记录组件(如运动传感器),但不能更换,这些附加组件应符合制造商的校准规范。 ====意义和用途====== 本规程规定了进行PDD检查和相关活动时校准和功能检查的最低要求。有关更多信息,请参阅实践 E1954 和指南 2000年 .
1.1 This practice provides guidelines for calibration and instrumentation (both analog and computerized systems) actively used in the psychophysiological detection of deception ( verification of truth ). As a minimum, such instrumentation shall simultaneously record an individual's respiratory, exosomatic electrodermal, and cardiovascular activity. 1.2 Analog polygraphs shall be calibrated by the psychophysiological detection of deception (PDD) examiner, manufacturer, or factory-authorized individual. 1.3 Computerized instrumentation shall be calibrated by the manufacturer or factory-authorized individual. 1.4 The PDD examiner or factory-authorized individual shall perform functionality checks to ensure instrumentation is operating properly. 1.5 This practice does not prohibit additional components which may be offered as supplemental measurements of physiological change. Additional recording components (such as movement sensors) may be used in addition to, but not replace, the required minimum components and these additional components shall meet the manufacturer's specifications for calibration. ====== Significance And Use ====== This practice sets forth the minimum requirements for calibration and functionality checks when conducting PDD examinations and related activities. For additional information see Practice E1954 and Guide E2000 .
分类信息
发布单位或类别: 美国-美国材料与试验协会
关联关系
研制信息
归口单位: E52.02
相似标准/计划/法规
现行
ASTM E2063-12(2017)
Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
校准和功能检查的标准实践用于法医心理生理检测欺骗(测谎)考试
2017-10-01
现行
ASTM D6318-24
Standard Practice for Calibrating a Fathometer Using a Bar Check Method
用棒检查法校准脂肪计的标准实施规程
2024-04-01
现行
AASHTO R 61-12(2020)
Standard Practice for Establishing Requirements for Equipment Calibrations, Standardizations, and Checks
确定设备校准、标准化和检查要求的标准实施规程
现行
ASTM D5011-17
Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
用传输标准校准臭氧监测仪的标准实践
2017-10-01
现行
ASTM D3609-22
Standard Practice for Calibration Techniques Using Permeation Tubes
使用渗透管校准技术的标准实施规程
2022-11-01
现行
ASTM D3474-23
Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications
包装应用中扭矩计的校准和使用的标准实施规程
2023-11-01
现行
ASTM D5280-96(2021)
Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
具有线性校准功能的空气质量测量方法的性能特性评定的标准实施规程
2021-09-01
现行
ASTM D3025-07(2021)
Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
通过使用校准棉花标准来标准化棉花纤维试验结果的标准做法
2021-01-01
现行
ASTM E2056-04(2016)
Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
用于使用替代混合物校准的多变量分析中的合格光谱仪和分光光度计的标准实践
2016-04-01
现行
ASTM D7282-24
Standard Practice for Setup, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
放射性测量用仪器的设置、校准和质量控制的标准实施规程
2024-04-01
现行
ASTM E1448/E1448M-09(2023)
Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
用于测量车辆对路面粗糙度响应的系统校准的标准实施规程
2023-03-01
现行
ASTM F2537-23
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
测量微动用线性位移传感器系统的校准标准实施规程
2023-09-01
现行
ASTM D5110-22a
Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
使用紫外线光度测定法校准臭氧监测器和认证臭氧转移标准的标准实施规程
2022-09-01
现行
VDI/VDE 2629 Sheet 2-DRAFT
Draft Document - Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
文件草案.轮廓测量系统的精度.特性及其检验.使用标准件/校准件测定特定轮廓测量的不确定度
2008-09-01
现行
ASTM D8392-22
Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials
催化材料粒度和形状分析用直接成像分析仪的校准和验证
2022-08-01
现行
ASTM ISO/ASTM51631-20
Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
电子束中剂量测量和常规剂量测定系统校准用量热剂量测定系统的使用标准实施规程
2019-05-15
现行
ASTM F1364-03(2022)
Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
使用校准装置证明干涉激光成像无损轮胎检测系统的检测能力的标准实施规程
2022-10-01
现行
ASTM F3269-21
Standard Practice for Methods to Safely Bound Behavior of Aircraft Systems Containing Complex Functions Using Run-Time Assurance
使用运行时保证对包含复杂功能的飞机系统的安全约束行为的方法的标准实施规程
2021-07-15