奥氏体不锈钢厚壁管道对接焊缝的超声相控阵检测工艺规范

2024-07-12

奥氏体不锈钢焊管生产在线固溶热处理工艺规范

2022-10-21

Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
退火或冷加工奥氏体不锈钢薄板、带材、板材和扁钢的标准规范

2024-03-01

压水堆核电厂核岛机械设备焊接规范 奥氏体不锈钢耐蚀堆焊工艺评定
Welding code for mechanical components of PWR nuclear islands Welding procedure quelification of anticorrosion overlaying with austenitie stainless steel

1996-10-24

压水堆核电厂核岛机械设备焊接规范 奥氏体不锈钢的焊接工艺评定
Welding code for mechanical components of PWR nuclear islands Welding procedure qualification of austenilic stainless steel

1996-10-24

08Cr19Mn6Ni3Cu2N高强度含氮奥氏体不锈钢焊接工艺评定规范

2020-09-28

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Austenitic Stainless Steel, (M-8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下10至18号奥氏体不锈钢（M-8或P-8）带或不带衬垫的保护金属极电弧焊的标准焊接工艺规范

1991-01-01

Standard Welding Procedure Specification (Swps) for Gas Metal Arc Welding (Short Circuiting Transfer Mode) of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
18至10号奥氏体不锈钢（M-8、P-8或S-8）焊态气体保护焊（短路过渡模式）标准焊接工艺规范（Swps） 带或不带衬垫

2002-01-01

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号奥氏体不锈钢（M-8、P-8或S-8）带或不带衬垫的钨极气体保护焊标准焊接工艺规范（Swps）

2002-01-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
1/8至1-1/2英寸厚的焊态奥氏体不锈钢（M-8/P-8/S-8 第1组）的钨极气体保护焊标准焊接工艺规范

2001-01-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Carbon Steel to Austenic Stainless Steel, (M-1 to M-8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
在焊态条件下 带或不带衬垫的10至18 Gauge碳钢至奥氏体不锈钢（M-1至M-8或P-8）的钨极气体保护焊标准焊接工艺规范

1990-01-01

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1), to Austenitic Stainless Steel (M-8/P-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下18至10号规格的碳钢（M-1/P-1）至奥氏体不锈钢（M-8/P-8）的钨极气体保护焊标准焊接工艺规范（SWPS） 带或不带衬垫

2015-01-14

Standard Welding Procedure Specification for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M8 or P-8), 10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下10至18号（M-1至M8或P-8） 带或不带衬垫的碳钢与奥氏体不锈钢的气体保护金属极电弧焊标准焊接工艺规范

1990-01-01

Standard Welding Procedure Specification for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8 or P-8)10 through 18 Gauge, in the As-Welded Condition, With or Without Backing
焊接状态下 带或不带衬垫的碳钢与奥氏体不锈钢（M-1至M-8或P-8）10至18 Gauge的保护金属极电弧焊的标准焊接工艺规范

1991-01-01

Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
焊接状态下1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范

2001-10-31

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的钨极气体保护焊标准焊接工艺规范（WPS） 厚 ER3XX 焊接状态 主要用于管道应用

2001-10-31

Standard Welding Procedure Specification (Swps) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8/P-8/S-8, Group 1), 10 through 18 Gauge, in the As-Welded Condition, with or without Backing
焊接状态下 带或不带衬垫的10至18 Gauge碳钢至奥氏体不锈钢（M-1至M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（Swps）

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
1/8英寸[3 mm]至1-1/2英寸[38 mm]厚、MIL-3XX、焊态主要用于海军应用的奥氏体不锈钢（S-8）钨极气体保护焊的海军应用标准焊接工艺规范（SWPS-N）

2016-01-01

Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1, P-1 or S-1 to M-8, P-8, or S-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
碳钢与奥氏体不锈钢（M-1、P-1或S-1至M-8、P-8或S-8）在焊态条件下18至10 Gauge（带或不带衬垫）的钨极气体保护焊标准焊接工艺规范（Swps）

2002-01-01

Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的保护金属极电弧焊标准焊接工艺规范（WPS） 厚 ER3XX-XX 焊接状态 主要用于管道应用

1997-03-20