Recommended Practices for Welding of Chromium-Molybdenum Steel Piping and Tubing
铬钼钢管道和管子的焊接推荐规程

1996-07-17

Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing
焊接奥氏体铬镍不锈钢管道和管道的推荐规程

1986-11-12

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 through 1/2 in. Thick, As-Welded Condition;1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications
ER90S-B3 1/8至1/2英寸铬钼钢（M-5A/P-5A）的钨极气体保护焊标准焊接工艺规范（SWPS） 厚 如焊接状态；1/8至3/4英寸 厚 焊后热处理条件 主要用于管道应用

1999-12-08

Wps:Chromium Molybdenum Steels, Primarily Pipe Applications (M-4/P-4, Group 1 or 2) - Gtaw (Consumable Insert Root) Followed by Shielded Metal Arcwelding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 OR 2), 1/8 Through 1/2 Inch Thick, As-Welded Condition
Wps:铬钼钢 主要用于管道应用（M-4/P-4 第1组或第2组）-Gtaw（自耗镶块根部） 然后是铬钼钢（M-4/P-4 第1组或第2组） 厚度为1/8至1/2英寸 焊接状态下的保护金属电弧焊

1999-01-01

Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications
铬钼钢（M-5A/P-5A）的保护金属极电弧焊标准焊接工艺规范（SWPS） E9018-B3 1/8至1/2英寸 厚 如焊接状态；1/8至1-1/2英寸 厚 焊后热处理条件 主要用于管道应用

1999-12-08

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 3/4 in. Thick, PWHT Condition, IN521 and ER90S-B3, Primarily Pipe Applications
1/8至1/2英寸铬钼钢（M-5A/P-5A）的钨极气体保护焊（自耗镶块根部）标准焊接工艺规范（SWPS） 厚 如焊接状态；1/8至3/4英寸 厚度 焊后热处理条件 IN521和ER90S-B3 主要用于管道应用

1999-12-08

Standard Welding Procedure Specification (SWPS) forShielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick,PWHT Condition, Primarily Pipe Applications
铬钼钢（M-4/P-4 第1组或第2组）屏蔽金属电弧焊的标准焊接工艺规范（SWPS） E8018-B2 1/8至1/2英寸 厚 如焊接状态；1/8至1-1/2英寸 厚 焊后热处理条件 主要用于管道应用

1999-12-08

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium- Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications
ER80S-B2 1/8至1/2英寸铬钼钢（M-4/P-4 1或2组）的钨极气体保护焊标准焊接工艺规范（WPS） 厚度 焊接状态 1/8至3/4英寸 厚 焊后热处理条件 主要用于管道应用

1999-12-08

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, ER90S-B3 and E9018-B3, Primarily Pipe Applic
1/8至1/2英寸铬钼钢（M-5A/P-5A）的气体保护钨极电弧焊后的标准焊接工艺规范（SWPS） 厚 如焊接状态；1/8至1-1/2英寸 厚度 焊后热处理条件 ER90S-B3和E9018-B3 主要用于管道应用

1999-12-08

Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition, 1/8 through 3/4 in. Thick, PWHT Condition, IN515 and ER80S-B2, Primarily Pipe Applications
铬钼钢（M-4/P-4 第1组或第2组） E8018-B2 1/8至1/2英寸的钨极气体保护焊（自耗镶块根部） 厚度 焊接状态 1/8至3/4英寸 厚度 焊后热处理条件 IN515和ER80S-B2 主要用于管道应用

1999-12-08