BS ISO 10110-5:2015规定了光学系统的设计和功能要求 用于制造和检验的技术图纸中的元件和系统。ISO 10110的本部分规定了指示表面形状偏差公差的规则。注:采用“条纹间距”单位的干涉测量术语广泛用于 公差规范。然而，使用非干涉测量方法对光学部件进行测试的情况有所改善 最近变得越来越重要。因此，与ISO 10110本部分的早期版本不同，纳米 现在应是表示表面形状偏差的首选和标准单位。边缘间距的用法是 考虑到明确规定了基本波长，仍然允许。ISO 10110的本部分适用于平面、球面、非球面、圆形和非圆形圆柱表面， 和复曲面以及其他非曲面的表面- 球形形状，如通常描述的表面。信息技术 不适用于衍射表面、菲涅耳表面和微光学表面。交叉引用:ISO 10110-1ISO 10110-10ISO 10110-19ISO 14999-4ISO 7944:1998ISO 10110-11:1996ISO 10110-12ISO 10110-14ISO/TR 14999-2购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS ISO 10110-5:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacturing and inspection.This part of ISO 10110 specifies rules for indicating the tolerance for surface form deviation.NOTE The terminology of interferometry employing the unit "fringe spacings" is widely used for the specification of tolerances. However, the usage of non-interferometric methods for testing of optical parts has recently become more important. Therefore, unlike in the earlier versions of this part of ISO 10110, nanometres shall now be the preferred and standard unit to express surface form deviations. The usage of fringe spacings is still permitted given that the base wavelength is explicitly stated.This part of ISO 10110 applies to surfaces of plano, spherical, aspheric, circular and non-circular cylindric, and toric form as well as to surfaces of other non-spherical shape such as generally described surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, and micro-optical surfaces.Cross References:ISO 10110-1ISO 10110-10ISO 10110-19ISO 14999-4ISO 7944:1998ISO 10110-11:1996ISO 10110-12ISO 10110-14ISO/TR 14999-2All current amendments available at time of purchase are included with the purchase of this document.