BS ISO 7919-3:2009+A1:2017给出了在正常运行条件下应用轴振动评估标准的指南，在耦合工业机器的轴承处或附近测量。这些指南以稳定运行振动和这些稳定值中可能出现的任何振幅变化为依据。规定的数值并非振动评估的唯一依据，因为一般情况下，机器的振动状态是通过考虑轴振动和相关结构振动来评估的。交叉引用:ISO 20816-1:2016ISO 20816-5ISO 10816-3:2009 Ed 2ISO 2041:2009 Ed 3ISO 20816-2:2017ISO 10817-1:1998ISO 21940-31:2013 ED1ISO 21940-11:2016ISO 13373-1:2002ISO 13373- 2:2016ISO 10816-7:2009版1ISO 21940-12:2016ISO 13373-3:2015包含以下内容:修订，2018年1月

BS ISO 7919-3:2009+A1:2017 gives guidelines for applying evaluation criteria of shaft vibration under normal operating conditions, measured at or close to the bearings of coupled industrial machines. These guidelines are presented in terms of both steady running vibration and any amplitude changes which can occur in these steady values. The numerical values specified are not intended to serve as the only basis for vibration evaluation since, in general, the vibratory condition of a machine is assessed by consideration of both the shaft vibration and the associated structural vibration.Cross References:ISO 20816-1:2016ISO 20816-5ISO 10816-3:2009 Ed 2ISO 2041:2009 Ed 3ISO 20816-2:2017ISO 10817-1:1998ISO 21940-31:2013 ED1ISO 21940-11:2016ISO 13373-1:2002ISO 13373-2:2016ISO 10816-7:2009 Ed 1ISO 21940-12:2016ISO 13373-3:2015Incorporates the following:Amendment, January 2018