现行

BS EN 728-1997

Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time
塑料管道系统 聚烯烃管道和配件 氧化诱导时间的测定

1997-07-15

现行

BS EN ISO 16871-2003

Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering
塑料管道系统 塑料管道和配件 暴露于直接（自然）风化的方法

2003-10-08

现行

BS EN 1056-1996

Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering
塑料管道系统 塑料管道和配件 暴露于直接（自然）风化的方法

1996-09-15

现行

ISO 16871-2003

Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
塑料管道系统——塑料管道和配件——暴露于直接（自然）风化的方法

2003-05-20

现行

DIN EN ISO 16871

Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
塑料管道和管道系统.塑料管道和配件.直接（自然）风化暴露方法（ISO 16871-2003）；德文版EN ISO 16871:2003

2003-12-01

现行

UNE-EN ISO 16871-2004

Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
塑料管道和管道系统.塑料管道和配件.直接（自然）风化暴露方法（ISO 16871-2003）

2004-01-30

现行

BS ISO 19899-2010

Plastics piping systems. Polyolefin pipes and mechanical fitting assemblies. Test method for the resistance to end load (AREL test)
塑料管道系统 聚烯烃管和机械配件组件 耐端部载荷的试验方法（AREL试验）

2010-11-30

现行

GOST R ISO 19899-2020

Трубопроводы из пластмасс. Механические соединения между фитингами и трубами из полиолефинов. Метод испытания на стойкость к осевой нагрузке (испытания AREL)
塑料管道系统 聚烯烃管和机械配件组件 抗端载试验方法（AREL试验）

现行

ISO 19899-2010

Plastics piping systems — Polyolefin pipes and mechanical fitting assemblies — Test method for the resistance to end load (AREL test)
塑料管道系统——聚烯烃管和机械配件组件——耐端部载荷的试验方法（AREL试验）

2010-08-30

现行

BS EN 802-1995

Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing
塑料管道系统 压力管道系统用注射成型热塑性塑料配件 用压碎法测定最大变形的试验方法

1995-07-15

现行

UNE-EN 802-1995

PLASTICS PIPING AND DUCTING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS FOR PRESSURE PIPING SYSTEMS. TEST METHOD FOR MAXIMUN DEFORMATION BY CRUSHING.
塑料管道系统 压力管道系统用注射成型热塑性塑料配件 通过压碎实现最大变形的试验方法

1995-09-18

现行

AS/NZS 1462.29-2019

Methods of test for plastic pipes and fittings, Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道和配件的试验方法 方法29:塑料管道和管道系统.用外推法测定管形热塑性材料的长期静水压强度

2019-12-15

现行

BS EN ISO 580-2005

Plastics piping and ducting systems. Injection-moulded thermoplastics fittings. Methods for visually assessing the effects of heating
塑料管道系统 注塑热塑性塑料配件 目视评估加热效果的方法

2005-11-05

现行

ISO 580-2005

Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
塑料管道系统——注塑热塑性塑料配件——目视评估加热效果的方法

2005-03-07

现行

UNE-EN 713-1994

PLASTICS PIPING SYSTEMS. MECHANICAL JOINTS BETWEEN FITTINGS AND POLYOLEFIN PRESSURE PIPES. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL PRESSURE OF ASSEMBLIES SUBJECTED TO BENDING.
塑料管道系统 配件和聚烯烃压力管之间的机械接头 弯曲组件在内部压力下密封性的试验方法

1994-11-24

现行

UNE-EN ISO 580-2005

Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
塑料管道和导管系统.注射成型热塑性塑料配件.加热效果的目视评估方法（ISO 580-2005）

2005-11-30

现行

DIN EN ISO 580

Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
塑料管道和导管系统.注射成型热塑性塑料配件.加热效果的目视评估方法（ISO 580-2005）；德文版EN ISO 580:2005

2005-05-01