Specification for forging stock, bars, extruded sections and forgings of aluminium-2¼% magnesium alloy
铝-2 3/16%镁合金锻坯、棒材、挤压型材和锻件规范

1985-12-31

Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
99%铝的锻坯、棒材、挤压型材和锻件规范

1985-12-31

Aerospace series. Aluminium and aluminium- and magnesium- alloys. Technical specification-Aluminium and aluminium alloy bar and section
航空航天系列 铝和铝及镁合金 技术规格 铝及铝合金棒材和型材

2019-04-12

Aluminium-copper-magnesium-silicon-manganese alloy bars and extruded sections (solution treated and aged at room temperature)
铝铜镁硅锰合金棒材和挤压型材（室温固溶处理和时效）

1952-08-31

Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
铝-铜-硅-镁合金（固溶处理和沉淀处理）的锻坯、棒材、挤压型材和锻件规范（Cu 1.5、Si 1、Mg 0.8）

1971-08-31

Aerospace series - Aluminium and aluminium- and magnesium- alloys - Technical specification - Part 3: Aluminium and aluminium alloy bar and section; German and English version EN 4400-3:2019
航空航天系列铝和铝及镁合金技术规范第3部分:铝和铝合金棒材和型材；德语和英语版本EN 4400-3:2019

2020-10-01

Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6)
镁-3%锌锆合金棒材和挤压型材规范（直径不超过100mm或较小截面尺寸）（Zn 3.0 Zr 0.6）

1973-03-15

Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝铜镁硅锰合金棒材和挤压型材规范（固溶处理和人工时效）（直径不超过200mm或较小截面尺寸）（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

1978-12-29

Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
铝-铜-镍-镁-铁-硅合金（固溶处理和沉淀处理）的锻坯、棒材、挤压型材和锻件规范（Cu 2、Ni 1、Mg 1、Si 0.9、Fe 0.9）

1971-08-31

Specification for bars and extruded sections of magnesium-1¼% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (not exceeding 50 mm diameter or minor sectional dimension) (Zn 1.25, Zr 0.6)
镁-1 3/16%锌锆合金棒材和挤压型材规范（适用于惰性气体保护电弧技术焊接）（直径不超过50 mm或较小截面尺寸）（Zn 1.25 Zr 0.6）

1973-03-15

Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially aged) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075)
铝锌铜铬合金挤压棒材和型材规范（固溶处理、控制拉伸和人工时效）（直径不超过150mm或较小截面尺寸）（Zn 5.6、Mg 2.5、Cu 1.6、Cr 0.23）（7075）

1990-02-28