1.1 本协议总结了适用于拉挤复合材料的ASTM和其他标准测试方法。这些测试方法的单独性能要求由特定的客户规范定义。 1.2 该协议还定义了从拉挤复合材料中取样的适当样本位置。 1.3 本协议未讨论可用于拉挤复合材料的所有可能标准试验方法。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 注1: 没有已知的ISO等效于本指南。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本规程旨在帮助选择增强拉挤复合材料的试验方案。 4.2 本规程旨在定义从增强拉挤复合材料中提取试样的位置。

1.1 This protocol summarizes the applicable ASTM and other standard test methods commonly used for pultruded composites. The individual performance requirements to these test methods are defined by specific customer specifications. 1.2 This protocol also defines appropriate specimen locations for sampling from the pultruded composites. 1.3 This protocol does not discuss all possible standard test methods that may be utilized for pultruded composites. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Note 1: There is no known ISO equivalent to this guide. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This practice is intended to aid in the selection of test protocols for reinforced pultruded composites. 4.2 This practice is intended to define the locations from which test specimens shall be taken from the reinforced pultruded composite.