ISO 14280:2002-航空和航天；带肋驱动器用于内部十字形带肋或无肋驱动器——公制系列 -国家数字标准馆

现行 ISO 14280:2002

到馆阅读

收藏跟踪

购买正版

Aerospace — Drivers, ribbed, for internal cruciform ribbed or unribbed drives — Metric series 航空和航天；带肋驱动器用于内部十字形带肋或无肋驱动器——公制系列

发布日期： 2002-07-04

ISO 14280规定了米制螺纹驱动器的尺寸，该驱动器插入米制螺钉中使用的内部十字形带肋或无肋驱动器，标称螺纹直径范围为1.6 mm至20 mm。

ISO 14280 specifies the dimensions of metric ribbed drivers which are inserted into internal cruciform ribbed or unribbed drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 49.030.20航空航天制造用紧固件 - 螺栓、螺钉、螺柱

关联关系

研制信息

归口单位： ISO/TC 20/SC 4

相似标准/计划/法规

BS ISO 14280-2002

Aerospace. Drivers, ribbed, for internal cruciform ribbed or unribbed drives. Metric series
航空航天带肋驱动器用于内部十字形带肋或无肋驱动器公制系列

BS ISO 14277-2002

Aerospace. Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives. Metric series
航空航天带肋驱动器用于内部偏置十字形带肋或无肋驱动器公制系列

Aerospace — Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives — Metric series
航空和航天；带肋驱动器用于内部偏置十字形带肋或无肋驱动器——公制系列

BS ISO 14281-2002

Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series
航空航天内部十字肋或无肋传动用量规公制系列

Aerospace — Gauges, for internal cruciform ribbed or unribbed drives — Metric series
航空和航天；内部十字形带肋或无肋传动用量规——公制系列

BS ISO 14278-2002

Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series
航空航天内部偏置十字肋或无肋传动用量规公制系列

Aerospace — Gauges, for internal offset cruciform ribbed or unribbed drives — Metric series
航空和航天；内部偏置十字肋或无肋传动用量规——公制系列

BS ISO 12256-2002

Aerospace. Drives, internal, cruciform, ribbed. Metric series
航空航天带肋十字形内部驱动器公制系列

Aerospace — Drives, internal, cruciform, ribbed — Metric series
航空和航天；带肋十字形内部驱动器——公制系列

BS ISO 14275-2002

Aerospace. Drives, internal, offset cruciform, ribbed. Metric series
航空航天带肋偏置十字形内部驱动器公制系列

Aerospace — Drives, internal, offset cruciform, ribbed — Metric series
航空和航天；带肋偏置十字形内传动装置——公制系列

KS W 0930(2018 Confirm)

항공 우주 - 나사, 접시 머리, 내부 오프셋 십자홈이 있거나 없는 드라이브, 머리끝 나사, MJ 나사, 금속 재료, 도장 또는 비도장, 강도 분류 1100MPa 이하치수
航空航天 - 螺丝平头内部偏移十字形肋或UNRIBBED DRIVE 螺纹头 MJ螺纹金属材料涂层或无涂层抗剪强度等级小于或等于1100MPa - 尺寸

KS W 0930(2023 Confirm)

항공 우주 - 나사, 접시 머리, 내부 오프셋 십자홈이 있거나 없는 드라이브, 머리끝 나사, MJ 나사, 금속 재료, 도장 또는 비도장, 강도 분류 1100MPa 이하치수
航空航天.内偏置粗糙带肋或无肋传动、螺纹连接至头部、MJ螺纹、金属材料、涂层或无涂层、强度等级小于或等于1100MPa的盘头螺钉.尺寸

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺钉盘头内偏置十字肋或无肋驱动螺纹至头部 MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
螺钉盘头内偏置十字形带肋或无肋驱动带螺纹至头部金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

BS ISO 12260-2016

Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
航空航天有涂层或无涂层的金属材料短或中长MJ螺纹阶梯柄内偏置十字带肋或无肋传动盘头螺钉强度等级小于或等于1100 MPa 尺寸

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空航天 - 螺丝盘头内部偏移十字形带肋或未经驱动阶梯柄短或中等长度MJ螺纹金属材料涂层或未涂层强度等级小于或等于1 100 MPa - 尺寸

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空航天.强度等级小于或等于1100MPa的金属材料长MJ螺纹中径柄内偏置十字形带肋或无肋盘头螺钉.尺寸

BS ISO 5856-2008

Aerospace. Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天100°标准沉头螺钉内偏置十字肋或无肋驱动标准柄短或中长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

BS ISO 13921-2008

Aerospace. Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天100度缩径沉头螺钉内偏置十字肋或无肋驱动标准柄短或中长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统