BS EN 13108-4:2016规定了热轧沥青混合料组的要求 在道路、机场和其他交通区域使用。热轧沥青用于表面层、粘合剂和粘合剂 课程，规范课程和基地。混合组热轧沥青混合料是在热沥青的基础上生产的。混合物 基于现场回收利用的沥青乳液和沥青材料不包括在本条款中 标准本欧洲标准包括选择成分材料的要求。它是 设计为结合EN 13108-20和EN 13108-21阅读。交叉引用:EN 1097-6:2013EN 1426EN 1427EN 12591EN 12592EN 12697-3EN 12697-4EN 12697-8EN 12697-12EN 12697-13EN 12697-22EN 12697-26EN 12697-37EN 12697-41EN 12697-43EN 12697-46EN 12697-47EN 13043EN 13108- 8EN 13108-20:2016EN 13108-21EN 13501-1:2007+A1:2009EN 13924-1EN 13924-2EN 14023EN ISO 383838ISO 383838EN ISO 11925-2ISO 11925-2购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN 13108-4:2016 specifies requirements for mixtures of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas. Hot Rolled Asphalt is used for surface courses, binder courses, regulating courses and bases.The mixtures of the mix group Hot Rolled Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard.This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.Cross References:EN 1097-6:2013EN 1426EN 1427EN 12591EN 12592EN 12697-3EN 12697-4EN 12697-8EN 12697-12EN 12697-13EN 12697-22EN 12697-26EN 12697-37EN 12697-41EN 12697-43EN 12697-46EN 12697-47EN 13043EN 13108-8EN 13108-20:2016EN 13108-21EN 13501-1:2007+A1:2009EN 13924-1EN 13924-2EN 14023EN ISO 3838ISO 3838EN ISO 11925-2ISO 11925-2All current amendments available at time of purchase are included with the purchase of this document.