1.1 这些测试方法涵盖了实验室测试数据的开发，这些数据描述了用于化学和轻烃泄漏的吸收材料的性能（及其保留能力）。 1.2 以SI单位表示的值将被视为标准值。本标准不包括其他计量单位。 1.3 本标准并不旨在解决与其使用相关的所有安全性问题（如果有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。 （有关具体警告声明，请参阅 10.4 .) 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。======意义和用途====== 5.1 这些方法将用作以一致方式比较吸收剂的基础。 5.2 这些试验不适用于试验方法中涵盖的吸附材料 F726 . 5.3 这些方法对于吸收剂与吸附剂的比较是无用的，即使所有吸收剂都表现出吸附性能。这两种类型的材料都有主要的实用领域。 5.4 这些方法可能没有列出将用过的吸附剂材料安全最终处置到环境中所需的所有安全和处置选项。必须遵守联邦、州和地方监管规则。

1.1 These test methods cover the development of laboratory test data that describe the performance of absorbent materials (and their retention ability) for use on chemical and light hydrocarbon spills. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (For a specific warning statement see 10.4 .) 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 These methods are to be used as a basis for comparison of absorbents in a consistent manner. 5.2 These tests are not appropriate for adsorbent materials which are covered in Test Method F726 . 5.3 These methods are not useful for a comparison of absorbents with adsorbents, even though all absorbents exhibit adsorbent properties. Both types of materials have prime areas of utility. 5.4 These methods may not list all the safety and disposal options necessary for safe ultimate disposal of used sorbent material into the environment. Federal, state, and local regulatory rules must be followed.