ISO 12162:2009-压力应用管道和管件用热塑性材料——分类、名称和设计系数 -国家数字标准馆

现行 ISO 12162:2009

到馆阅读

收藏跟踪

购买正版

Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient 压力应用管道和管件用热塑性材料——分类、名称和设计系数

发布日期： 2009-10-27

ISO 12162:2009确立了管道形式热塑性材料的分类，并规定了材料名称。它还规定了计算设计应力的方法。
适用于压力应用管道和配件的材料。

ISO 12162:2009 establishes the classification of thermoplastics materials in pipe form and specifies the material designation. It also specifies a method for calculating the design stress.
It is applicable to materials intended for pipes and fittings for pressure applications.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.040.45管道部件和管道 - 塑料配件、 23.040.20管道部件和管道 - 塑料管

关联关系

研制信息

归口单位： ISO/TC 138/SC 5

相似标准/计划/法规

BS EN ISO 12162-2009

Thermoplastics materials for pipes and fittings for pressure applications. Classification, designation and design coefficient
压力管道和配件用热塑性材料分类、名称和设计系数

GOST ISO 12162-2017

Материалы термопластичные для напорных труб и соединительных деталей. Классификация, обозначение и коэффициент запаса прочности
压力管道和配件用热塑性材料分类、命名和设计系数

압력관 및 이음관용 열가소성 플라스틱－ 등급 및 분류－설계 계수
压力管道和管件用热塑性材料分类和命名总体使用（设计）系数

KS M ISO 12162(2021 Confirm)

압력관 및 이음관용 열가소성 플라스틱－ 등급 및 분류－설계 계수
压力管道和管件用热塑性材料分类和命名总体使用（设计）系数

GB/T 18475-2001

热塑性塑料压力管材和管件用材料分级和命名总体使用（设计）系数
Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall service(design) coefficient

BS 08/30092426 DC

BS ISO 12162. Thermoplastics materials for pipes and fittings for pressure applications. Classification, designation coefficient, and designation
BS ISO 12162 压力管道和配件用热塑性材料分类、命名系数和命名

UNE-EN ISO 12162-2010

Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient (ISO 12162:2009)
压力管道和管件用热塑性材料分类、名称和设计系数（ISO 12162-2009）

AS/NZS 1462.6-2008

Methods of test for plastics pipes and fittings, Method 6: Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure
塑料管和配件的试验方法方法6:压力下流体运输用热塑性塑料管、配件和组件.耐内压性

BS 2782-11-METHOD 1121H-1996

Methods of testing plastics. Thermoplastics pipes, fittings and valves-Thermoplastics pipes for the transport of liquids under pressure. Calculation of head losses
塑料的试验方法热塑性塑料管道、配件和阀门压力下液体输送用热塑性塑料管水头损失的计算

GOST 32415-2013

Трубы напорные из термопластов и соединительные детали к ним для систем водоснабжения и отопления. Общие технические условия
压力热塑管及其供水和供暖系统的配件一般规格

BS EN ISO 13264-2017

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings
无压地下排水和下水道用热塑性塑料管道系统热塑性塑料配件装配配件机械强度或柔性的试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
无压地下排水和排污用热塑性塑料管道系统——热塑性塑料配件——装配配件机械强度或柔性的试验方法

BS EN ISO 13263-2017

Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
无压地下排水和下水道用热塑性塑料管道系统热塑性塑料配件冲击强度试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength
无压地下排水和排污用热塑性塑料管道系统——热塑性塑料配件——冲击强度试验方法

ASTM F2562/F2562M-24

Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
无压力排水和下水道用钢增强热塑性带肋管和配件规范

UNE 53959-2002 IN

Plastics. Thermoplastics pipes and fittings for the transport of liquids under pressure. Calculation of head losses.
塑料压力下液体运输用热塑性塑料管和配件水头损失的计算

BS 2782-11-METHOD 1109A-1989

Methods of testing plastics. Thermoplastics pipes, fittings and valves-Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
塑料的试验方法热塑性塑料管、配件和阀门

Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
获得热塑性管材静水压设计基础或热塑性管产品压力设计基础的标准试验方法

BS EN ISO 1167-2-2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure-Preparation of pipe test pieces
流体输送用热塑性塑料管、配件和组件内压阻力的测定管道试件的制备

BS 2782-11-METHOD 1121C-1997

Methods of testing plastics. Thermoplastics pipes, fittings and valves-Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
塑料的试验方法热塑性塑料管道、配件和阀门流体输送用热塑性塑料管标称外径和标称压力基于英寸的系列

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统