1.1本规程为涂层涂敷者提供了一种标准鉴定方法，以验证其熟练程度和能力，以达到在钢表面（包括核设施安全相关区域）涂敷规定涂层所需的质量。 1.2本文所述实践的变更或简化可能适用于特殊涂层工作，如设备供应商车间人员的维护或资格。这种做法的目的不是为所有资格规定单一的基础。 1.3根据本实施规程评定合格的涂层涂敷器应由中规定的合格代理进行评估。应按照第节的规定编制报告，并按照第节的规定进行认证。 1.4本规程的目的是仅判断涂层涂敷器使用适当工具和设备涂敷规定涂层的能力。 1.5以英寸表示的数值- 磅单位应视为标准。括号中给出的值仅供参考。 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 This practice provides a standard qualifying method for coating applicators to verify their proficiency and ability to attain the required quality for application of specified coatings to steel surfaces including those in safety-related areas in a nuclear facility. 1.2 Variations or simplifications of the practice set forth herein may be appropriate for special coating work such as maintenance or qualifications of equipment suppliers shop personnel. It is not the intent of this practice to mandate a singular basis for all qualifications. 1.3 Evaluation of the coating applicator being qualified in accordance with this practice, shall be by qualified agents as specified in. Reports shall be prepared as specified in Section, and certification as specified in Section. 1.4 It is the intent of this practice to judge only the ability of the coating applicator to apply specified coatings with the proper tools and equipment. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.