现行

ASTM D6729-20

Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
通过100米毛细管高分辨率气相色谱法测定火花点火发动机燃料中的各个组分的标准测试方法

2020-06-01

现行

ASTM D6733-01(2020)

Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
通过50米毛细管高分辨率气相色谱法测定火花点火发动机燃料中各个组分的标准测试方法

2020-11-01

现行

ASTM D6730-22

Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
用100米毛细管（带柱前）高分辨气相色谱法测定火花点火发动机燃料中单个组分的标准试验方法

2022-11-01

现行

DIN 38413-1

German standard methods for the analysis of water, waste water and sludge; Individual components (Group P); Determination of hydrazine (P 1)
德国水、废水和污泥分析标准方法；单个组分（P组）；联氨（P 1）的测定

1982-03-01

现行

ASTM D5061-19

Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
冶金焦炭结构成分显微镜测定的标准测试方法

2019-03-15

现行

ASTM D5864-23

Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
润滑剂或其组分需氧水生生物降解测定的标准试验方法

2023-11-01

现行

JB/T 10534-2005

多层镍镀层 各层厚度和电化学电位同步测定法
Standard test method for simultaneous thickness and electrochemical potential determination of individual layers multilayer nickel deposit

2005-09-23

现行

ASTM B764-04(2021)

Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
多层镍镀层中单层厚度和电极电位同时测定的标准试验方法（步进试验）

2021-04-01

现行

ASTM D642-20

Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
确定船运集装箱 部件和单元载荷抗压性的标准试验方法

2020-10-01

现行

ASTM F3495-23

Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components
测定膝-股骨陶瓷部件静态失效载荷的标准试验方法

2023-07-15

现行

ASME B31J-2017

Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components
测定金属管道部件应力增强系数（i系数）的标准试验方法

2017-06-16

现行

ASTM D5141-23

Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
沉积物滞留装置过滤部件过滤效率和流速测定的标准试验方法

2023-09-01

现行

ASTM D6139-22

Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
用Gledhill摇瓶测定润滑剂或其组分需氧水生生物降解的标准试验方法

2022-04-01

现行

JC/T 2273-2014

硅烷/硅氧烷建筑防护剂中有效成分含量及有害物质测定方法
Standard test methods for determination of effective component and harmful substances in silane/siloxane building protecting agents

2014-10-14

现行

GB/T 31226-2014

扫描隧道显微术测定气体配送系统部件表面粗糙度的方法
Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components

2014-09-30

现行

ASTM D6886-24

Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Air-Dry Low VOC Coatings by Gas Chromatography
用气相色谱法测定风干低VOC涂料中单个挥发性有机化合物重量百分比的标准试验方法

2024-11-01

现行

ASTM D4623-16

Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
用过孔法测定岩体地应力的标准试验方法&x2014；三分量钻孔变形仪

2016-12-01

现行

ASTM D7807-20

Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
通过气相色谱和化学发光检测法测定石油馏分油和硫成分的沸点范围分布的标准试验方法

2020-05-01

现行

ASTM G144-01(2022)

Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
用高温燃烧分析仪进行总碳分析测定材料和部件残余污染的标准试验方法

2022-09-01

现行

ASTM D8544-24

Standard Test Method for Determination of Conductive Deposits of Electrical and Mechanical Components from Fluids in Liquid and Vapor States within an Electrically Charged System
带电系统内液体和蒸气状态流体中电气和机械部件导电沉积物测定的标准试验方法

2024-03-01