ГОСТ 3845-2017-金属管内部静水压力试验方法-国家数字标准馆

现行 ГОСТ 3845-2017

到馆阅读

收藏跟踪

购买正版

Трубы металлические. Метод испытания внутренним гидростатическим давлением 金属管内部静水压力试验方法

发布日期： 2017-02-28

实施日期： 2017-09-01

此标准规定了金属无缝，焊接，svertnopayanyh管包括由钢制成的双金属管，有色金属及合金，内部流体静压，以确认其承受一个试验压力能力的试验方法。测试内部流体静力的方法压力是在压力下的固定管测试介质上的冲击

Настоящий стандарт устанавливает метод испытаний металлических бесшовных, сварных, свертнопаяных труб, включая биметаллические трубы, из стали, чугуна, сплавов и цветных металлов, внутренним гидростатическим давлением для подтверждения их способности выдерживать испытательное давление. Метод испытаний внутренним гидростатическим давлением заключается в воздействии на трубу неподвижной испытательной среды, находящейся под давлением

分类信息

发布单位或类别：俄罗斯-俄罗斯国家标准

CCS分类： H20/29冶金 - 金属理化性能试验方法

ICS分类： 23.040.10管道部件和管道 - 铁管和钢管

关联关系

研制信息

归口单位： Межгосударственный Совет по стандартизации метрологии и сертификации

起草单位： Открытое акционерное общество «Российский научно-исследовательский институт трубной промышленности» (ОАО «РосНИТИ»)

相似标准/计划/法规

Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure
塑料管道系统压力管道溶剂胶结接头用注射成型承插接头耐短期内部静水压力的试验方法

UNE-EN 804-1995

PLASTICS PIPING SYSTEMS. INJECTION-MOULDED SOCKET FITTINGS FOR SOLVENT-CEMENTED JOINTS FOR PRESSURE PIPING. TEST METHOD FOR RESISTANCE TO A SHORT-TERM INTERNAL HYDROSTATIC PRESSURE.
塑料管道系统压力管道溶剂胶结接头用注射成型承插接头耐短期内部静水压力的试验方法

Injection-moulded plastics socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
塑料管道系统.压力管道用溶剂胶结接头用注射模制套筒配件.耐短期内部静水压力的试验方法；德文版EN 804:1994

AS/NZS 1462.10-1998

Methods of test for plastics pipes and fittings, Method 10: Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications
塑料管道和配件的试验方法方法10:非压力应用配件和弹性密封接头的静水压试验方法

Not end-loadbearing elastomeric sealing ring type joints between thermoplastic pressure pipes and fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust
热塑性塑料管道系统.压力管道和模制配件之间的非端部承载弹性密封环型接头.无端推力的内部静水压力下密封性试验方法；德文版EN 714:1994

GB/T 32491-2016

玻璃纤维增强热固性树脂管及管件长期静水压试验方法
Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings

Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
获得热塑性管材静水压设计基础或热塑性管产品压力设计基础的标准试验方法

Thermoplastics piping systems. Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings. Test method for leaktightness under internal hydrostatic pressure without end thrust
热塑性塑料管道系统压力管道和模制配件之间的非端部承载弹性密封圈型接头无端推力的内部静水压力下密封性试验方法

UNE-EN 714-1995

THERMOPLASTICS PIPING SYSTEMS. NON-END-LOAD-BEARING ELASTOMERIC SEALING RING TYPE JOINTS BETWEEN PRESSURE PIPES AND MOULDED FITTINGS. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL HYDROSTATIC PRESSURE WITHOUT END THRUST.
热塑性塑料管道系统压力管道和模制配件之间的非端部承载弹性密封圈型接头无端推力的内部静水压力下密封性试验方法

UNE-EN 911-1996

PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHanical joints for thermoplastics pressure piping. Test method for leaktightness under external hydrostatic pressure.
塑料管道系统热塑性压力管道用弹性密封环式接头和机械接头外部静水压力下密封性的试验方法

Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
塑料管道系统.热塑性压力管道用弹性密封环型接头和机械接头.外部静水压力下密封性的试验方法；德语版本EN 911:1995

BS EN ISO 3458-2015

Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure
塑料管道系统配件和压力管道之间的机械接头内压下密封性的试验方法

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
塑料管道系统 - 配件和压力管之间的机械接头 - 内部压力下的泄漏测试方法

BS EN ISO 9311-3-2005

Adhesives for thermoplastic piping systems-Test method for the determination of resistance to internal pressure
热塑性管道系统用胶粘剂

플라스틱 배관 시스템 — 압력관과 이음관의 기계적 연결부 — 내압하에서 수밀성 시험
塑料管道系统配件和压力管道之间的机械接头内压密封性试验方法

GOST R ISO 3458-2020

Трубопроводы из пластмасс. Механические соединения между фитингами и напорными трубами. Метод испытания на герметичность под внутренним давлением
塑料管道系统配件和压力管道之间的机械接头内压密封性试验方法

AS/NZS 1462.6-2008

Methods of test for plastics pipes and fittings, Method 6: Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure
塑料管和配件的试验方法方法6:压力下流体运输用热塑性塑料管、配件和组件.耐内压性

Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness
塑料管道系统热塑性塑料阀门耐内压和密封性试验方法

Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
恒定内压下塑料管失效时间的标准试验方法

UNE-EN 917-1997

PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHODS FOR RESISTANCE TO INTERNAL PRESSURE AND LEAKTIGHTNESS.
塑料管道系统热塑性塑料阀门耐内压和密封性的试验方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统